Item Description
30mm Planetary Gearbox
Mechanical Proportions:
Gearbox Description:
Housing content |
Bearing at output |
Radial load (10mm from the flange) |
Shaft axial load |
Shaft press fit force, max. |
Radial play of shaft |
Thrust play of shaft |
Backlash at no-load |
Steel | Sleeve bearings | ≤3Kgf | ≤2.5Kgf | ≤10Kgf | ≤0.08mm | ≤0.2mm | ≤3° |
Metal | Ball bearings | ≤3.5Kgf | ≤2.5Kgf | ≤10Kgf | ≤0.05mm | ≤0.2mm | ≤3° |
Motor Shaft Pinion Specification:
Module | No. of teeth | Pressure angle | Hole diameter | Reduction ratio. |
.five | 11 | 20° | two.28,2.48,2.ninety eight | 1/5,1/19,1/27,1/seventy one,1/a hundred,1/139,1/264,1/516,1/721 |
.5 | 17 | 20° | two.28,2.48,2.98 | one/4,1/14,1/fifty one,1/189 |
.five | eight | 20° | two.28 | 1/35,1/939 |
Gearbox Specification:
Reduction ratio | one/four | one/five | 1/fourteen | one/19 | one/27 | one/35 | one/fifty one | 1/71 | one/a hundred | 1/139 | one/189 | one/264 | one/516 | 1/721 | 1/939 |
Rated tolerance torque |
two | two | three | three | 4 | four | six | 6 | 8 | eight | 10 | 10 | 10 | 10 | ten |
Max momentary tolerance torque |
six | 6 | 9 | nine | 12 | twelve | 18 | eighteen | 24 | 24 | thirty | thirty | thirty | 30 | 30 |
Performance | eighty% | 80% | 70% | 70% | 70% | 70% | 60% | 60% | sixty% | 60% | fifty% | 50% | fifty% | 50% | fifty% |
Duration (L-mm) |
23.6 | 23.six | thirty | thirty | thirty | 30 | 36.4 | 36.four | 36.4 | 36.four | 42.8 | forty two.8 | 42.8 | forty two.8 | 42.8 |
Bodyweight (g) |
79 | 79 | ninety two | 92 | 92 | 92 | 107 | 107 | 107 | 107 | 122 | 122 | 122 | 122 | 122 |
About Us:
We specialised in researching, building and servicing electrical motors, gearbox and large precision gears with the little modules.
Soon after a long time of improvement, we have an impartial solution layout and the R&D team, service group, and skilled good quality management group.
What is far more, we have 2 joint ventures. One is situated in HangZhou, which produces hybrid stepper motor, precious linear stepper motor, brushless DC motor, servo motor, stepper motor driver, brushless motor driver, encoder and brake.
Yet another 1 is located in HangZhou, which generates DC gear motor. The factory has dozens of CNC equipment and high precision examination products, implements the procedure administration and automated procedure in most making approach.
We also have 2 cooperation factories. A single is generating AC reversible synchronous motor and AC servo motor, the other 1 is generating linear long lasting stepper motor, long lasting stepper motors.
Customer’s Going to:
Connected Merchandise:
These compact, lightweight, lower backlash inline gear reducers were initially designed for encoder purposes. They are also appropriate for numerous other drive methods. Encoder equipment reducers have a very low moment of inertia at the shaft enter and are rated for input speeds up to 3000 rpm. Two body dimensions are offered with gear ratios from 4.ninety six:1 to 3600:1. Our encoder gearbox sync pads are accessible from inventory.
Equipment reducers, also referred to as reducers, come in numerous transmission designs and are created to multiply torque and reduce input velocity to a preferred output velocity. The main benefit of inline gearboxes is their capacity to sustain handle in apps involving high rotational speeds. Their performance and ability to offer high enter speeds with minimum backlash make inline reducer gearboxes best for a wide range of movement handle purposes