Product Description
Worm Gear Speed Reducer Unit
Input Configurations |
Double or single input shaft (NRV) |
PAM / IEC motor input shaft with circle or square flange (NMRV) |
|
Output Configurations
|
Double or single output shaft |
Output flange |
Main Feature
The gearbox can rotate in both directions operate and contains 1 oil filling at delivery. you will benefit from its high quality and a short delivery time.
Specification
Model |
Motor Input Flange (circle) |
Transmission Ratio |
Power (kw) |
Ratio (i) |
Nominal Torque (Nm) |
|||||||||||||||
PAM / IEC |
Internal Dia. |
Dis. Between Diagonal Screw Holes |
External Dia. |
Width of Key Slot |
5 |
7.5 |
10 |
15 |
20 |
25 |
30 |
40 |
50 |
60 |
80 |
100 |
||||
N |
M |
P |
E |
Diamter of Input Shaft |
||||||||||||||||
NMRV25 |
56B14 |
50 |
65 |
80 |
3 |
9 |
– |
9 |
– |
0.06 |
7.5-60 |
2.6-14 |
||||||||
NMRV30 |
63B5 |
95 |
115 |
140 |
4 |
11 |
– |
0.06-0.18 |
7.5-80 |
2.6-14 |
||||||||||
63B14 |
60 |
75 |
90 |
|||||||||||||||||
56B5 |
80 |
100 |
120 |
3 |
9 |
– |
||||||||||||||
56B14 |
50 |
65 |
80 |
|||||||||||||||||
NMRV40 |
71B5 |
110 |
130 |
160 |
5 |
14 |
– |
0.09-0.37 |
7.5-100 |
11-53 |
||||||||||
71B14 |
70 |
85 |
105 |
|||||||||||||||||
63B5 |
95 |
115 |
140 |
4 |
11 |
|||||||||||||||
63B14 |
60 |
75 |
90 |
|||||||||||||||||
56B5 |
80 |
100 |
120 |
3 |
– |
9 |
||||||||||||||
NMRV50 |
80B5 |
130 |
165 |
200 |
6 |
19 |
– |
0.12-0.75 |
7.5-100 |
21-89 |
||||||||||
80B14 |
80 |
100 |
120 |
|||||||||||||||||
71B5 |
110 |
130 |
160 |
5 |
14 |
– |
||||||||||||||
71B14 |
70 |
85 |
105 |
|||||||||||||||||
63B5 |
95 |
115 |
140 |
4 |
– |
11 |
||||||||||||||
NMRV63 |
90B5 |
130 |
165 |
200 |
8 |
24 |
– |
0.25-1.5 |
7.5-100 |
56-166 |
||||||||||
90B14 |
95 |
115 |
140 |
|||||||||||||||||
80B5 |
130 |
165 |
200 |
6 |
19 |
– |
||||||||||||||
80B14 |
80 |
100 |
120 |
|||||||||||||||||
71B5 |
110 |
130 |
160 |
5 |
– |
14 |
||||||||||||||
71B14 |
70 |
85 |
105 |
|||||||||||||||||
NMRV75 |
100/112B5 |
180 |
215 |
250 |
8 |
– |
28 |
– |
0.55-4 |
7.5-100 |
90-269 |
|||||||||
100/112B14 |
110 |
130 |
160 |
|||||||||||||||||
90B5 |
130 |
165 |
200 |
8 |
24 |
– |
||||||||||||||
90B14 |
95 |
115 |
140 |
|||||||||||||||||
80B5 |
130 |
165 |
200 |
6 |
– |
19 |
||||||||||||||
80B14 |
80 |
100 |
120 |
|||||||||||||||||
71B5 |
110 |
130 |
160 |
– |
– |
14 |
||||||||||||||
NMRV90 |
100/112B5 |
180 |
215 |
250 |
8 |
– |
28 |
– |
0.55-4 |
7.5-100 |
101-458 |
|||||||||
100/112B14 |
110 |
130 |
160 |
|||||||||||||||||
90B5 |
130 |
165 |
200 |
8 |
24 |
– |
||||||||||||||
90B14 |
95 |
115 |
140 |
|||||||||||||||||
80B5 |
130 |
165 |
200 |
6 |
– |
19 |
||||||||||||||
80B14 |
80 |
100 |
120 |
|||||||||||||||||
NMRV110 |
132B5 |
230 |
265 |
300 |
10 |
– |
38 |
– |
1.1-7.5 |
7.5-100 |
242-660 |
|||||||||
132B14 |
130 |
165 |
200 |
– |
||||||||||||||||
100/112B5 |
180 |
215 |
250 |
8 |
28 |
– |
||||||||||||||
90B5 |
130 |
165 |
200 |
– |
24 |
|||||||||||||||
90B14 |
95 |
115 |
140 |
– |
||||||||||||||||
80B5 |
130 |
165 |
200 |
– |
19 |
|||||||||||||||
NMRV130 |
132B5 |
230 |
265 |
300 |
10 |
– |
38 |
– |
2.2-7.5 |
7.5-100 |
333-1596 |
|||||||||
132B14 |
130 |
165 |
200 |
– |
||||||||||||||||
100/112B5 |
180 |
215 |
250 |
8 |
– |
28 |
||||||||||||||
90B5 |
130 |
165 |
200 |
– |
– |
24 |
||||||||||||||
90B14 |
95 |
115 |
140 |
|||||||||||||||||
NMRV150 |
160B5 |
250 |
300 |
350 |
12 |
– |
42 |
– |
2.2-15 |
7.5-100 |
570-1760 |
|||||||||
132B5 |
230 |
265 |
300 |
10 |
– |
38 |
– |
|||||||||||||
132B14 |
130 |
165 |
200 |
– |
||||||||||||||||
100/112B5 |
180 |
215 |
250 |
8 |
– |
28 |
Company profile
Scenario
Packing
FAQ
Q1: I want to buy your products, how can I pay?
A: You can pay via T/T(30%+70%), L/C ,D/P etc.
Q2: How can you guarantee the quality?
A: One year’s warranty against B/L date. If you meet with quality problem, please send us pictures or video to check, we promise to send spare parts or new products to replace. Our guarantee not include inappropriate operation or wrong specification selection.
Q3: How we select models and specifications?
A: You can email us the series code (for example: RC series helical gearbox) as well as requirement details, such as motor power,output speed or ratio, service factor or your application…as much data as possible. If you can supply some pictures or drawings,it is nice.
Q4: If we don’t find what we want on your website, what should we do?
A: We offer 3 options:
1, You can email us the pictures, drawings or descriptions details. We will try to design your products on the basis of our
standard models.
2, Our R&D department is professional for OEM/ODM products by drawing/samples, you can send us samples, we do customized design for your bulk purchasing.
3, We can develop new products if they have good market. We have already developed many items for special using successful, such as special gearbox for agitator, cement conveyor, shoes machines and so on.
Q5: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
Q6: How about your product delivery time?
A: Normally for 20’container, it takes 25-30 workdays for RV series worm gearbox, 35-40 workdays for helical gearmotors.
Application: | Motor, Machinery, Agricultural Machinery |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | B3,B6,B7,B8,V5,V6 |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
Customization: |
Available
| Customized Request |
---|
What is a Worm Gearbox and How Does It Work?
A worm gearbox, also known as a worm gear reducer, is a mechanical device used to transmit rotational motion an
How to Install and Align a Worm Reducer Properly
Proper installation and alignment of a worm reducer are crucial for ensuring optimal performance and longevity. Follow these steps to install and align a worm reducer:
- Preparation: Gather all the necessary tools, equipment, and safety gear before starting the installation process.
- Positioning: Place the worm reducer in the desired location, ensuring that it is securely mounted to a stable surface. Use appropriate fasteners and mounting brackets as needed.
- Shaft Alignment: Check the alignment of the input and output shafts. Use precision measurement tools to ensure that the shafts are parallel and in line with each other.
- Base Plate Alignment: Align the base plate of the reducer with the foundation or mounting surface. Ensure that the base plate is level and properly aligned before securing it in place.
- Bolt Tightening: Gradually and evenly tighten the mounting bolts to the manufacturer’s specifications. This helps ensure proper contact between the reducer and the mounting surface.
- Check for Clearance: Verify that there is enough clearance for any rotating components or parts that may move during operation. Avoid any interference that could cause damage or performance issues.
- Lubrication: Apply the recommended lubricant to the worm reducer according to the manufacturer’s guidelines. Proper lubrication is essential for smooth operation and reducing friction.
- Alignment Testing: After installation, run the worm reducer briefly without a load to check for any unusual noises, vibrations, or misalignment issues.
- Load Testing: Gradually introduce the intended load to the worm reducer and monitor its performance. Ensure that the reducer operates smoothly and efficiently under the load conditions.
It’s important to refer to the manufacturer’s installation guidelines and specifications for your specific worm reducer model. Proper installation and alignment will contribute to the gearbox’s reliability, efficiency, and overall functionality.
d torque between non-parallel shafts. It consists of a worm screw and a worm wheel, both of which have helical teeth. The worm screw resembles a threaded cylinder, while the worm wheel is a gear with teeth that mesh with the worm screw.
The working principle of a worm gearbox involves the interaction between the worm screw and the worm wheel. When the worm screw is rotated, its helical teeth engage with the teeth of the worm wheel. As the worm screw rotates, it translates the rotational motion into a perpendicular motion, causing the worm wheel to rotate. This perpendicular motion allows the worm gearbox to achieve a high gear reduction ratio, making it suitable for applications that require significant speed reduction.
One of the key features of a worm gearbox is its ability to provide a high gear reduction ratio in a compact design. However, due to the sliding nature of the meshing teeth, worm gearboxes may exhibit higher friction and lower efficiency compared to other types of gearboxes. Therefore, they are often used in applications where efficiency is not the primary concern but where high torque and speed reduction are essential, such as conveyor systems, elevators, automotive steering systems, and certain industrial machinery.
editor by
Worm Gearboxes in Conveyor Systems: Benefits and Considerations
Worm gearboxes play a crucial role in conveyor systems, offering several benefits and considerations for their effective integration:
- Space Efficiency: Worm gearboxes have a compact design, making them suitable for applications with limited space, such as conveyor systems.
- High Reduction Ratios: Worm gearboxes can achieve high reduction ratios in a single stage, allowing for slower conveyor speeds without sacrificing torque.
- Self-Locking: Worm gearboxes have inherent self-locking properties, preventing the conveyor from moving when the motor is not actively driving it.
- Directional Control: Worm gearboxes facilitate directional control, enabling the conveyor to move forward or reverse as needed.
- Low Noise: Worm gearboxes often produce lower noise levels compared to other gearbox types, contributing to quieter conveyor operation.
However, there are also considerations to keep in mind when using worm gearboxes in conveyor systems:
- Efficiency: Worm gearboxes may have lower mechanical efficiency compared to some other gearbox types, leading to energy losses.
- Heat Generation: Worm gearboxes can generate more heat due to sliding contact between the worm and gear, necessitating proper cooling mechanisms.
- Lubrication: Proper lubrication is critical to prevent wear and ensure efficient operation. Regular maintenance is required to monitor lubrication levels.
- Load and Speed: Worm gearboxes are well-suited for applications with high torque and low to moderate speed requirements. They may not be optimal for high-speed conveyors.
Before integrating a worm gearbox into a conveyor system, it’s important to carefully consider the specific requirements of the application, including load, speed, space constraints, and efficiency needs. Consulting with gearbox experts and manufacturers can help ensure the right choice for the conveyor’s performance and longevity.
CX 2023-08-22
in Voronezh Russian Federation sales price shop near me near me shop factory supplier Udl Speed Variator Variable Reducer Coaxial Stepless Motor Gearbox Diecast Aluminium Alloy Silent Vibration-Free Running Stable Manufacture Udl Speed Variator manufacturer best Cost Custom Cheap wholesaler
EPG will constantly adhere to it company spirit of getting functional, progressive, productive and exceptional to make the top intercontinental transmission travel. Our specialists and engineers have 23 several years of Experience in the Bearing Industry. There is a technological center of province level, EPG academician operating station, experiment station for EPG publish physicians, and national 863 program set up in EPG group. With these platforms and robust complex capacity, the a lot more than 400 technicians have produced all range of special large specific and substantial toughness goods, executed mould plans for essential parts in the automobile and national sector revitalizing system, ensuing a lot more than 5000 produced in excess of, amid which 33 objects are autonomous patent technologies with 4 patent authorized .
UDL Velocity Variator Variable EPTT CoaXiHu (West EPT) Dis.al Stepless EPT EPTT Diecast Aluminium Alloy Silent Vibration-free of charge Managing Stable Manufacture UDL Speed Variator
UDL Series planetary cone amp disk phase-less speed variator
high quality and lower cost
pls come to feel cost-free to get in touch with with us if you have any issue
….
Variator and speed motorvariator
For EPTT ratings from ,fifteen to 9,2 kW.
Silent, vibration-free of charge running.
EPT efficiency.
Bidirectional rotation.
EPTT handwhel positional on either facet.
Pace repeatability at max: plusmn ,five%
Pace repeatability at min: plusmn ,1%.
Regulaton sensibility: ,5 rpm.
Casings (TX): diecast aluminium alloy.
Shafts: case hardened and tempered 20Cr steel soon after ground gtEPTC60
Interior factors: 100Cr6 heat-treated metal.
All the measurements are painted with Ral 5571 blue epoxy-polyester powder.
Variator and pace motorvariator.
For EPTT scores from ,fifteen to nine,two kW.
Silent, vibration-totally free running.
EPT efficiency.
Bidirectional rotation.
EPTT handwhel positional on both facet.
Speed repeatability at max: ,five%
Pace repeatability at min: ,one%.
Regulaton sensibility: ,5 rpm.
Casings (TX): diecast aluminium alloy.
Shafts: circumstance hardened and tempered 20Cr metal right after ground gtEPTC60
Inside factors: 100Cr6 heat-treated steel.
All the dimensions are painted with Ral 5571 blue epoxy-polyester powder.