Product Description
Product Parameters
S series geared motor speed reducer with 90 Degree Gear box
Components:
1. Housing: Cast Iron
2. Gears: Helical-worm Gears
3. Input Configurations: Equipped with Electric Motors
Solid Shaft Input, IEC-normalized Motor Flange
4. Applicable Motors:
Single Phase AC Motor, Three Phase AC Motor
Brake Motors, Inverter Motors
Multi-speed Motors, Explosion-proof Motor
Roller Motor
5. Output Configurations: CZPT Shaft Output
Hollow Shaft Output.
Features:
1. Modular design, compact structure
2. Low noise
3. Hollow output shaft with keyed connection, shrink disk, or torque arm
4. Can be combined with other types of gearboxes (Such as R Series, UDL Series)
Models |
Output Shaft Dia. |
Input Shaft Dia. |
Power(kW) |
Ratio |
Max. Torque(Nm) |
|
Solid Shaft |
Hollow Shaft |
|||||
S38 |
20mm |
20mm |
16mm |
0.18~0.75 |
10.27~152 |
90 |
S48 |
25mm |
25/30mm |
16mm |
0.18~1.5 |
11.46~244.74 |
170 |
S58 |
30mm |
30/35mm |
16mm |
0.18~3 |
10.78~196.21 |
295 |
S68 |
35mm |
40/45mm |
19mm |
0.25~5.5 |
11.55~22 |
520 |
S78 |
45mm |
50/60mm |
24mm |
0.55~7.5 |
9.96~241.09 |
1270 |
S88 |
60mm |
60/70mm |
28mm |
0.75~15 |
11.83~222 |
2280 |
S98 |
70mm |
70/90mm |
38mm |
1.5~22 |
12.75~230.48 |
4000 |
Hardness: | Hardened Tooth Surface |
---|---|
Installation: | 90 Degree |
Layout: | Expansion |
Gear Shape: | Bevel Gear |
Step: | Single-Step |
Type: | Gear Reducer |
Samples: |
US$ 150/Piece
1 Piece(Min.Order) | |
---|
Maintenance Tips for Prolonging the Life of a Worm Gearbox
Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:
- Lubrication: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
- Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
- Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
- Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
- Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
- Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
- Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
- Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
- Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
- Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
How to Calculate the Efficiency of a Worm Gearbox
Calculating the efficiency of a worm gearbox involves determining the ratio of output power to input power. Efficiency is a measure of how well the gearbox converts input power into useful output power without losses. Here’s how to calculate it:
- Step 1: Measure Input Power: Measure the input power (Pin) using a power meter or other suitable measuring equipment.
- Step 2: Measure Output Power: Measure the output power (Pout) that the gearbox is delivering to the load.
- Step 3: Calculate Efficiency: Calculate the efficiency (η) using the formula: Efficiency (η) = (Output Power / Input Power) * 100%
For example, if the input power is 1000 watts and the output power is 850 watts, the efficiency would be (850 / 1000) * 100% = 85%.
It’s important to note that efficiencies can vary based on factors such as gear design, lubrication, wear, and load conditions. The calculated efficiency provides insight into how effectively the gearbox is converting power, but it’s always a good practice to refer to manufacturer specifications for gearbox efficiency ratings.
Preventing Backlash in a Worm Gearbox
Backlash in a worm gearbox can lead to reduced accuracy, positioning errors, and decreased overall efficiency. Here are steps to prevent or minimize backlash:
- High-Quality Components: Use high-quality worm gears and worm wheels with tight manufacturing tolerances. Precision components will help reduce backlash.
- Proper Meshing: Ensure the worm gear and worm wheel are properly aligned and meshed. Improper meshing can lead to increased backlash.
- Preload: Applying a small amount of preload to the worm gear can help reduce backlash. However, excessive preload can increase friction and wear.
- Anti-Backlash Mechanisms: Consider using anti-backlash mechanisms, such as spring-loaded systems or adjustable shims, to compensate for any inherent backlash.
- Lubrication: Proper lubrication can reduce friction and play a role in minimizing backlash. Use a lubricant that provides good film strength and reduces wear.
- Maintenance: Regularly inspect and maintain the gearbox to identify and address any changes in backlash over time.
It’s important to strike a balance between reducing backlash and maintaining smooth operation. Consulting with gearbox experts and following manufacturer guidelines will help you optimize your worm gearbox’s performance while minimizing backlash.
editor by CX 2023-09-06
China wholesaler Helical Gearbox Inline Helical Gear Box Bevel Worm Reduction Shaft Mounted Parallel Manufacturers Industrial Coaxial Two Stage Unit Crane Duty Helical Gearbox automatic gearbox
Product Description
Helical Gearbox inline helical gear box bevel worm reduction Shaft Mounted parallel manufacturers industrial coaxial 2 stage unit crane duty Helical Gearbox
helical concentric gearbox speed reducer decelerator has the features of high versatility,good combination and heavy loading capability, along with other merits such as easy to attain various transmission ratios, high efficiency, low vibrationand high permissible axis radial load. This series can not only be combined with various kinds of reducers and variators and meet the requirements, but also beadvantage of localization of related transmission equipment.
1) Output speed: 0.6~1,571rpm
2) Output torque: up to 18,000N.m
3) Motor power: 0.18~160kW
4) Mounted form: foot-mounted and flange-mounted mounting
Product Name | SLR Series Rigid Tooth helical reducer |
Gear Material | 20CrMnTi |
Case Material | HT250 |
Shaft Material | 20CrMnTi |
Gear Processing | Grinding finish by HOFLER Grinding Machines |
Color | Customized |
Noise Test | Bellow 65dB |
Aspect | Worm Gearbox | Helical Gearbox |
Efficiency | Lower efficiency due to sliding friction between the worm and worm wheel. | Higher efficiency due to rolling contact between helical gear teeth. |
Torque Transmission | Excellent torque transmission and high reduction ratios achievable in a single stage. | Good torque transmission, but may require multiple stages for high reduction ratios. |
Noise and Vibration | Generally higher noise and vibration levels due to sliding action. | Lower noise and vibration levels due to smoother rolling contact. |
Backlash | Higher inherent backlash due to the design. | Lower backlash due to meshing of helical teeth. |
Efficiency at Higher Speeds | Less suitable for high-speed applications due to efficiency loss. | More suitable for high-speed applications due to higher efficiency. |
Overload Protection | Natural self-locking feature provides some overload protection. | May not have the same level of inherent overload protection. |
Applications | Commonly used for applications requiring high reduction ratios, such as conveyor systems and heavy-duty machinery. | Widely used in various applications including automotive transmissions, industrial machinery, and more. |
Both worm and helical gearboxes have their place in engineering, and the choice between them depends on the specific requirements of the application. Worm gearboxes are preferred for applications with high reduction ratios, while helical gearboxes are chosen for their higher efficiency and smoother operation.
Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
---|
How Does a Worm Gearbox Compare to Other Types of Gearboxes?
Worm gearboxes offer unique advantages and characteristics that set them apart from other types of gearboxes. Here’s a comparison between worm gearboxes and some other common types:
- Helical Gearbox: Worm gearboxes have higher torque multiplication, making them suitable for heavy-load applications, while helical gearboxes are more efficient and offer smoother operation.
- Bevel Gearbox: Worm gearboxes are compact and can transmit motion at right angles, similar to bevel gearboxes, but worm gearboxes have self-locking capabilities.
- Planetary Gearbox: Worm gearboxes provide high torque output and are cost-effective for applications with high reduction ratios, whereas planetary gearboxes offer higher efficiency and can handle higher input speeds.
- Spur Gearbox: Worm gearboxes have better shock load resistance due to their sliding motion, while spur gearboxes are more efficient and suitable for lower torque applications.
- Cycloidal Gearbox: Cycloidal gearboxes have hig
Does a Worm Reducer Require Frequent Maintenance?
Worm reducers generally require less frequent maintenance compared to some other types of gearboxes due to their design and operating characteristics. However, maintenance is still essential to ensure optimal performance and longevity. Here are some key points to consider:
- Lubrication: Proper lubrication is crucial for worm gearboxes. Regularly check the lubricant level and quality to prevent wear and overheating. Lubricant should be changed as recommended by the manufacturer.
- Inspections: Periodically inspect the gearbox for signs of wear, damage, or oil leaks. Check for any unusual noises, vibrations, or changes in performance that could indicate a problem.
- Tightening and Alignment: Check and tighten any loose fasteners and ensure that the gearbox is properly aligned. Misalignment can lead to increased wear and reduced efficiency.
- Seal Maintenance: Inspect and maintain seals to prevent oil leakage and contaminants from entering the gearbox.
- Cleaning: Keep the gearbox clean from debris and contaminants that could affect its performance. Regular cleaning can prevent premature wear and damage.
- Load and Speed: Ensure that the gearbox is operating within its rated load and speed limits. Exceeding these limits can lead to accelerated wear and potential failure.
- Environmental Conditions: Consider the operating environment of the gearbox. Extreme temperatures, humidity, and other factors can impact the gearbox’s performance and longevity.
While worm gearboxes are known for their durability and self-locking feature, neglecting maintenance can lead to premature wear, reduced efficiency, and potential breakdowns. Following the manufacturer’s recommendations for maintenance intervals and procedures is essential to keep the worm reducer in optimal condition.
h shock load capacity and compact design, but worm gearboxes are more cost-effective and can handle higher reduction ratios.
While worm gearboxes have advantages such as high torque output, compact design, and self-locking capability, the choice between gearbox types depends on the specific requirements of the application, including torque, efficiency, speed, and space limitations.
editor by CX 2023-08-16
China OEM R F K S Series Parallel Shaft Inline Gear Box Speed Reducer Reducer Worm Bevel Helical Geared Motor Gearbox comer gearbox
Product Description
HUAKE Hot Selling KA series gear box reducer geared motor reductor made in china
K series product performance
High transmission efficiency, low energy consumption and superior performance. High rigidity cast iron box with ribs; hard-toothed gears are made of high-quality alloy steel, the surface is carburized and quenched and hardened, and the teeth are finely machined, with stable transmission, low noise, large bearing capacity, low temperature rise and long service life.
Product Parameters
Brand Name |
HUAKE |
Product Name |
K Helical-bevel gear units |
Material |
Steel or cast iron |
Weight |
11Kg-1700Kg |
Color |
Customizable |
Heat treatment |
Carburising,Quenching,Gear Grinding |
Advantage |
1.K series spiral bevel gear reducer with small vibration, low noise, energy saving. 2.Selection of high quality steel material, steel cast iron box, gear surface after high frequency heat treatment. |
Product Description
Our process of production
Our product line
Hardness: | Hardened Tooth Surface |
---|---|
Installation: | 90 Degree |
Layout: | Expansion |
Gear Shape: | Bevel Gear |
Step: | Single-Step |
Type: | Gear Reducer |
Samples: |
US$ 1000/Piece
1 Piece(Min.Order) | |
---|
Lubrication Requirements for a Worm Gearbox
Lubrication is crucial for maintaining the performance and longevity of a worm gearbox. Here are the key considerations for lubricating a worm gearbox:
- Type of Lubricant: Use a high-quality, high-viscosity lubricant specifically designed for worm gearboxes. Worm gearboxes require lubricants with additives that provide proper lubrication and prevent wear.
- Lubrication Interval: Follow the manufacturer’s recommendations for lubrication intervals. Regularly check the gearbox’s temperature and oil condition to determine the optimal frequency of lubrication.
- Oil Level: Maintain the proper oil level to ensure effective lubrication. Too little oil can lead to insufficient lubrication, while too much oil can cause overheating and foaming.
- Lubrication Points: Identify all the lubrication points on
Maintenance Tips for Prolonging the Life of a Worm Gearbox
Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:
- Lubrication: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
- Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
- Temperature Monitoring: Keep an eye on the operating temperature
How to Calculate the Efficiency of a Worm Gearbox
Calculating the efficiency of a worm gearbox involves determining the ratio of output power to input power. Efficiency is a measure of how well the gearbox converts input power into useful output power without losses. Here’s how to calculate it:
- Step 1: Measure Input Power: Measure the input power (Pin) using a power meter or other suitable measuring equipment.
- Step 2: Measure Output Power: Measure the output power (Pout) that the gearbox is delivering to the load.
- Step 3: Calculate Efficiency: Calculate the efficiency (η) using the formula: Efficiency (η) = (Output Power / Input Power) * 100%
For example, if the input power is 1000 watts and the output power is 850 watts, the efficiency would be (850 / 1000) * 100% = 85%.
It’s important to note that efficiencies can vary based on factors such as gear design, lubrication, wear, and load conditions. The calculated efficiency provides insight into how effectively the gearbox is converting power, but it’s always a good practice to refer to manufacturer specifications for gearbox efficiency ratings.
of the gearbox. Excessive heat can degrade the lubricant and damage components.
- Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
- Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
- Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
- Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
- Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
- Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
- Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
the gearbox, including the worm and wheel gear surfaces. Apply the lubricant evenly to ensure complete coverage.
- Temperature: Consider the operating temperature of the gearbox. Some lubricants have temperature limits, and extreme temperatures can affect lubricant viscosity and performance.
- Cleanliness: Keep the gearbox and the surrounding area clean to prevent contaminants from entering the lubricant. Use proper filtration and seals to maintain a clean environment.
- Monitoring: Regularly monitor the gearbox’s temperature, noise level, and vibration to detect any signs of inadequate lubrication or other issues.
Proper lubrication will reduce friction, wear, and heat generation, ensuring smooth and efficient operation of the worm gearbox. Always refer to the manufacturer’s guidelines for lubrication specifications and intervals.
editor by CX 2023-08-14
China Custom Customized Products High Precision Quality Helical Bevel Reducer Gear Motor K Series Reduction Gearbox worm gear box elecon
Product Description
China K Series Spiral Bevel Geared Reducer for Electric Motor
Components:
1. Housing: Cast Iron
2. Gears: Helical-bevel Gears
3. Input Configurations: Equipped with Electric Motors, CZPT Shaft Input, IEC-normalized Motor Flange
4. Applicable Motors: Single Phase AC Motor, Three Phase AC Motor, Brake Motors, Inverter Motors,
Multi-speed Motors, Explosion-proof Motor, Roller Motor
5. Output Configurations: CZPT Shaft Output, Hollow Shaft Output
Models:
K Series – Foot-mounted, CZPT shaft output
KAB Series – Foot-mounted, hollow shaft output
KA Series – Keyed hollow shaft output
KF Series – B5 Flange-mounted, CZPT shaft output
KAF Series – B5 Flange-mounted, hollow shaft output
KAZ Series – B14 Flange-mounted, hollow shaft output
KAT Series – Hollow shaft output, torque arm
KH, KHB, KHF, KHZ Series – Hollow shaft output, shrink disk
KV, KVB, KVF, KVZ Series – Hollow shaft output, splined hollow shaft
K(KA, KF, KAF, KAB, KAZ)S Series – CZPT shaft input
Product Advantages
K series gearbox is 1 kind of Helical Bevel type gearbox , High-stainless cast iron case,it is designed based on modularization,which bring many difference kinds of combinations ,mounting types ,and structure designs.
Product Name |
K Series Helical Bevel Geared Motor speed reducer 3kw 4kw 5.5kw 7.5kw 11kw 15kw |
Output configuration |
solid shaft, splined shaft |
Mounted form |
foot-mounted and flange-mounted mounting |
Efficiency |
High power density |
Model |
GK,GKF,GKA,GKAF,GKAZ,GKHF,GK37~GK187 etc. |
Technology |
CNC grinding technology |
Application areas |
Metallurgical machinery, food machinery,logistics and transportation and so on. |
R series reducer has the characteristics of small volume and large torque transmission. It is designed and manufactured on the basis of modular combination system. There are many motor combinations,installation forms and structural schemes. R series reducer adopts the modular design principle of unit structure, with high transmission efficiency, low energy consumption and superior performance.
Product Description
Features of product
1.High transmission efficiency, stable operation, low noise
2.long service life, high bearing capacity
3.The ratio can meet various of working condition
4.Superior performance. Hard tooth surface gear use the high quality alloy steel.
Detailed Photos
Product Parameters
Models |
Output Shaft Dia. |
Input Shaft Dia. |
Power(kW) |
Ratio |
Max. Torque(Nm) |
|
Solid Shaft |
Hollow Shaft |
|||||
K38 |
25mm |
30mm |
16mm |
0.18~3.0 |
5.36~106.38 |
200 |
K48 |
30mm |
35mm |
19mm |
0.18~3.0 |
5.81~131.87 |
400 |
K58 |
35mm |
40mm |
19mm |
0.18~5.5 |
6.57~145.15 |
600 |
K68 |
40mm |
40mm |
19mm |
0.18~5.5 |
7.14~144.79 |
820 |
K78 |
50mm |
50mm |
24mm |
0.37~11 |
7.22~192.18 |
1550 |
K88 |
60mm |
60mm |
28mm |
0.75~22 |
7.19~197.27 |
2700 |
K98 |
70mm |
70mm |
38mm |
1.3~30 |
8.95~175.47 |
4300 |
K108 |
90mm |
90mm |
42mm |
3~45 |
8.74~141.93 |
8000 |
K128 |
110mm |
100mm |
55mm |
7.5~90 |
8.68~146.07 |
13000 |
K158 |
120mm |
120mm |
70mm |
11~160 |
12.66~150.03 |
18000 |
K168 |
160mm |
140mm |
70mm |
11~200 |
17.35~164.44 |
32000 |
K188 |
190mm |
160mm |
70mm |
18.5~200 |
17.97~178.37 |
50000 |
Our Advantages
Application: | Motor, Motorcycle, Machinery, Agricultural Machine |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Expansion, Parallel |
Gear Shape: | Bevel Gear |
Step: | Single-Step |
Samples: |
US$ 500/Piece
1 Piece(Min.Order) | |
---|
Is a worm gear reducer gearbox right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer gearbox
Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.
Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.
It has a low clearance
Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by CX 2023-06-06
China Professional R Series Helical Bevel Gear Boxgearbox With Motoruse Of Helical Gear Box with Free Design Custom
Applicable Industries: Building Material Shops, Manufacturing Plant, Machinery Repair Shops, Farms
Gearing Arrangement: Helical
Output Torque: 50~2300Nm
Input Speed: 300-1800Rpm
Output Speed: 0.06-800rpm
Quality Control System: ISO9001:2008
Certificate: CCC,CQM,Supplier Assessment, Planetary Gearbox High Precision Stepper Motor Ratio 3-1001 Speed Reducer For Spring Machine Machinery MA
Mounting Position: Horizontal (foot mounted) or Vertical (flange mounted)
Color: According to customer’s request
Phase: Single or 3 phase
Gear material: Low carbon high alloy steel
Heat treatment: Carburising/quenching/gear grinding
Protect feature: Explosion-proof
Export experience: About 20 years
Price: Competitive
Packaging Details: Standard carton/Pallet/Standard wooden case (depends on order quantity).Can also according to customers special request.
Port: ZheJiang
R Series Helical Bevel Gear Box/gearbox With Motor/use Of Helical Gear Box
R Series Helical Gear Motor is designed and produced for mixers,conveyors belts, industrial and port lifting equipment.The gears are made of high wear resisting alloy materials, speciallly treated and finely processed.
Features of product
1.High heat-radiating efficiency, high carrying ability
2.Best quality,competitive price
3.Installation Flexibility: All models are designed for various mounting position (M1~M6) specified by customers
4.Smooth running and low noise
The whole geared motors are small in volume, plastic nylon gym pulley with bearing OD 3.5 inch 90mm gym pulley with great load-carrying capacity,steady running, low noise and high efficiency.For high output speeds, the exclusively single-stage gear units GR17-GRX137 offer compact solutions for your system design.
Product parameter
Mounting position
Company profile
Guomao Motor is the HangZhou manufacturer to supply professional gear motors for automated parking systems across continents, since then we have over 20 years of experience, brand recognition and consistent good quality. CZPT brand gear motor has professionally designed features towards parking systems Profession, Micro Speed Dc 6v 12v Reduction Gearbox 12mm Electric Mini Dc Geared Motor special chassis design, strong and light weight, better waterproof design, safe and durable .Our strong belief is QUALITY IS OUR CULTURE.
Packaging & Shipping
Certification
Our Services
1.Different kinds of payment are available for you.
2.The questions about the encoder will be answered within 24 hours.
3.We are the manufacture so we could supply the product as soon as possible.
4.We have the best after-sale service to provide you with good after-sales service.
FAQ
Q:what about the payment?
A:30% TT in advance+70% balance before shipment or total advance.
Q:Can you provide customized products?
A:We accept customized products as per your special requirement or drawings.
Q:how to select suitable products?
A:usually we can select 1 machine which is suitable for you with Some informations from you,such as ratio/motor speed/mounting dimension/ out torque etc.
Q: What about your warranty?
A:12 to 18 months warranty according to different products and lifetime service.
The Different Types of Gearboxes
There are many different types of gearboxes. Some brands have more than one type. In this article, we’ll discuss the planetary gearbox, the worm reduction gearbox, the shaft mounted gearbox, and the one speed gearbox. This article will also help you determine which type of gearbox is best for your vehicle. And don’t worry if you don’t know the terminology yet. We’ll explain each type in detail so that you know what you’re getting yourself into.
Planetary gearbox
Planetary gears have many advantages. The multiple gears in a planetary gearbox mesh simultaneously during operation. As such, they provide high efficiency and transmit high transmittable torque. These gears are widely used in various industries and are resistant to high shock loads and demanding conditions. CZPT is one of the companies that offer planetary gearboxes. Its products do not require special tools for assembly, and its scalable design minimizes safety stock.
Among the numerous benefits of planetary gearing is its compactness and lightweight. As such, it is suitable for wide applications with space and weight constraints. However, to truly appreciate its benefits, it is necessary to understand its mechanisms. Here are some of the most common details about planetary gearing:
The planetary gearbox has two mounted gears: an input shaft and an output shaft. Each gear has multiple teeth that are attached to a carrier and rotate with the input shaft. The carrier is connected to the output shaft. A planetary gear is mounted on both gears via a carrier. The carrier rotates in order to drive the planetary gear. The sun gear is often the input gear. The other gear is called the outer gear.
Planetary gearboxes are highly customizable. The size, mounting, and housing options vary, as do the reduction ratios and input speeds. Different types can be manufactured for different applications and include options such as electrical or mechanical preload. The final design of a planetary gearbox can be highly customized, based on the specifications of the application. By combining engineering excellence and ongoing innovation, planetary gearboxes provide years of trouble-free operation.
A planetary gearbox can be either an electric motor or a manual one. The latter has more features than the former, and can be used in applications where space is an issue. The primary features of a planetary gearbox include its backlash, torque, and ratio. Secondary features include noise, corrosion resistance, and construction. A planetary gearbox is a highly versatile gearbox that can drive anything from simple machinery to advanced electrical systems.
Worm reduction gearbox
The global worm reduction gearbox market report compiles key insights from the industry to help you improve your business strategy. This report will help you create a comprehensive business document that will enhance your company’s competitive edge. To obtain this report, visit our website now! Read our latest report to find out what you can expect from the global worm reduction gearbox market. Alternatively, request a sample copy for more details. Here is a sneak peek of the report:
Worm gears are made with different thread counts and are usually not matched with the CZPT standard. In general, a single thread worm should be used with a single thread worm. Worm gears have either right or left threads, and their thread count will be different as well. This type of gear is used to reduce the speed of a rotating shaft. The speed reduction ratio will be about 50 percent if the worms have the same thread count as the CZPT gears.
The standard gear set transfers power at the peak load point of a tooth, called the pitchline. The worm gear moves slowly against the wheel’s metal surface. The worm gear is also more complex than the standard gear because the worm is sliding rather than rolling. Worm gears are hard to lubricate. Moreover, the sliding contact between the gear and worm increases the complexity of the gear set. They can be a great solution for applications where noise is a significant factor.
The axial pitch and circular pitch of the worm are equal. The ratio of these two indices determines the speed of transmission. For a worm reduction gearbox to work, the axial pitch and the circular pitch must match. The pitch angle of a worm can either be left-handed or right-handed. The lead of a worm is the distance one thread travels in one revolution. The lead angle is the angle tangent to the thread helix of the cylinder’s pitch. When a worm mesh is reversed, the majority of the mesh will be on the receding arc.
Worm gears generate more heat than their counterparts, so it is important to choose a worm reduction gearbox carefully. You will want to choose the material and amount of lubricating oil carefully. Worm gears are generally made of tin bronze. The paired worms are hardened to HRC45-55. In general, they are durable, lasting up to ten years. But they will wear out – and they wear out – so you may want to consider some other factors.
Shaft-mounted gearbox
Shaft-mounted gearboxes are designed for a variety of mining and quarry applications. Their high reliability and low maintenance make them an excellent choice in these types of applications. Shaft-mounted gearboxes also feature an optional backstop device that prevents the unit from rotating in one direction. This makes them an excellent choice for applications where alignment accuracy is an issue. Here are some of the benefits of using a shaft-mounted gearbox:
Shaft-mounted gearboxes are typically constructed of aluminium, and come in sizes ranging from 050 to 125. They feature a variety of reduction ratios and ensure optimum efficiency in all operating conditions. New S series sizes, 140 and 150, extend the application range of shaft-mounted gearmotors. They are both backed by a two-year warranty. For even greater peace of mind, Shaft-mounted gearboxes are available with a range of warranty options.
The most common applications for a Shaft-mounted gearbox include traction-driven applications where a low-speed shaft is required for operation. They also are suitable for applications without a foundation, where the motor is mounted next to the reducer. To prevent the gear drive from rotating, a torque arm is attached between the motor and the shaft. Small-sized shaft-mounted gear drives are usually made without motor mount kits, which can make them an excellent choice for conveying light loads.
Another important feature of a Shaft-mounted gearbox is its mounting position. The reduced motion through the drive is redirected through the shaft, creating additional forces. These additional forces can affect the performance of the gearbox, causing vibrations and noise. Consequently, it is important to replace worn or damaged belts on a regular basis. Further, shaft-mounted gearboxes can be affected by problems with other components and amplify vibrations.
1 speed gearbox
CZPT Group Components produces one speed gearboxes. These transmissions are produced in the CZPT Group’s Kassel plant. They are compact and robust, and are designed for easy integration. The Bosch Rexroth GD1 one-speed gearbox is easy to install horizontally or vertically. The Plug and Drive system integrates the gearbox with the existing cooling system. There are many other benefits to this gearbox.
With an ID.3 electric drive motor, the maximum torque is delivered at 16,000 rpm. This single-speed transmission offers high power density and excellent noise-reduction, making it ideal for electric vehicles. The e-drive motor is extremely quiet and requires precision manufacturing. The e-drive motor also enables a wide range of driving conditions. It can reverse when needed, and reaches its maximum speed at 16,000.
The single-speed gearbox is a standard feature on most electric vehicles. Some electric vehicles, such as the Porsche Taycan, will be equipped with a two-speed gearbox. This gearbox offers more top speed and range, but it is more complex than a standard single-speed gearbox. CZPT doesn’t need to add complexity to its electric vehicles. After all, a 355 horsepower family wagon is not likely to need a dual-speed gearbox.
In addition to simplifying the transmission, the patent claims also address improvements in structural design. Fig. 5 shows a schematic representation of a transmission 50′, wherein gear sets Z1 and Z4 are exchanged between partial transmissions. This switch matrix also reflects the synchronized gears and lastshelf gears. Hydraulically betatigte Lamellenkupplungen (HBA) also form a last-shelf gear.
Another advantage of the patent claim is that it offers numerous functional freedoms, which is especially valuable in the design of an automobile. One of the patent claims identifies a tosatzlicher middle gear that allows a driver to switch between second and third gears, with a single gearbox. In a conventional one-speed transmission, the tosatzlicher middle gear is attached to the second and first part gearbox. The latter has a second and third gear.
China Best Sales P2SH7 helical gear reduction box reducer reducer for mining machine with high quality
Applicable Industries: Manufacturing Plant, Machinery Repair Shops, Food & Beverage Factory, Energy & Mining
Weight (KG): 90
Gearing Arrangement: Helical
Output Torque: top to 952000N.m
Input Speed: 750-3000r/min
Output Speed: 1-1200r/min
Certification: ISO9001
shaft: solid shaft or hollow shaft
shaft direction: parallel or right angle
Packaging Details: standard export packages piv gear boxes
GUOMAO GEARBOX
PV/HB Series General Gearbox/forward reverse gearbox/helical gear box for wind turbine generator
Features
1. Unique design concept for heavy duty condition.2 .High modular design, Factory direct Aluminium Alloy worm geared reduc gear box motor reductor 220v biomimetic surface with owned intellectual property right.3. High quality casting housing improves the gearbox mechanical strength and anti-vibration capability.4. Transmission shaft is designed as poly line. Compact structure meets the higher torque transmit capacity.5. Usual mounting mode and rich optional accessories.
Product design
1. Transmission stage:2 stage, 3 stage or 4 stage.2. Mounting mode: foot mounted and vertical mounted.3. Output shaft: solid shaft, hollow shaft(with keyway, shrink disc or involute splines) .
Technical data
Type
Stage
Model
ratio
Nominal power
(KW)
Nominal Torque
Shaft
Parallel shaft gearbox
Single
3–9
1.25–5.6
30-4744
2200-165300
S. Solid shaft
H. Hollow shaft
D. hollow shaft
shrink disk
double
4–6
6.3–28
21-5193
5900-843000
three
5–26
22.4-112
9-4749
10600-952000
four
7–26
100–450
4.1-1325
18400-944000
right angle gearbox
double
4–18
5–14
41-4436
5800-226000
three
4–26
12.5–90
62-4452
75710-952000
four
5–26
80–400
2.6-1652
10.6-1652
Product Overviews
ApplicationMain applied for
1. Hoist and transport
2. Electric power
3. Coal mining
4. Cement and construction
5. Metallurgy
6. Chemical industry and environmental protection
7.harbor and shipping
Other parameters
Packaging & NDR series Right Angle Output Precision Planetary Gearbox ShippingSafety Packing Method :
1.Inside :Plastic bags with Chemical Desiccant For Gear Housing 2.Middle :Individual Carton packaging 3. Outside :Wooden Box
More reducer
More Reducer For You
Our ServicesGUOMAO Reducer, having state-of-the-art equipment, advanced management conception, perfect quality management system and high quality staff member team as well as network service, speed variator speed reducing boxes marine gearbox transmission gearbox gearbox manufacturer variable speed transmission can meet the needs of customers.
1. We could supply the samples if you have a good quantity.
2. We undertake the problems due to quality.
3. We supply detail answers about technical questions.
4. Different kinds of payment are available for you.
5. We accept the nonstandard design.
Types of Gearboxes
There are several types of gearboxes. Some are known as helical gear reducers, while others are called planetary gearboxes. The article also discusses Continuously Variable Transmission (CVT) and helical gear reducer. If you are interested in purchasing a new gearbox, make sure to read our articles on these different types. If you are confused, consider reading our articles on planetary gearboxes and helical gear reducers.
planetary gearbox
The planetary gearbox has several advantages. Its compact design and light weight allows it to transmit high torques while remaining quiet. The gears are connected to one another through a carrier, which is typically fixed and helps transmit torques to the output shaft. Its planetary structure arrangement also reduces backlash and provides high rigidity, which is important for quick start and stop cycles and rotational direction change. Depending on the design and performance desired, planetary gearboxes are categorized into three main types:
The type of planetary gears used in a given application determines the overall cost of the unit. Manufacturers offer a range of prices, and they can help you determine which gearbox is right for your needs. You should also ask a manufacturer for the cost of a planetary gearbox. By asking about price and specs, you can avoid wasting money and time on a planetary gearbox that does not perform up to its potential.
A planetary gearbox is probably installed in your new car’s automatic transmission. For more information, consult your owner’s manual or call the dealer’s service department. This type of gearbox is more complex than other types of gearboxes, so if you don’t know much about them, do an internet search for “planetary gearbox.”
The teeth of a planetary gearbox are formed by the stepping motion of two gears: the sun gear and the inner ring. The sun gear is the input, while the planetary gears rotate around the sun gear. Their ratio depends on the number of teeth and the space between the planets. If you have a 24 tooth sun gear, the planetary gears’ ratio will be -3/2. The sun gear is also attached to the axle.
Another advantage of a planetary gear system is that it can generate high torques. The load is shared among multiple planet gears. This makes the gears more resilient to damage. A planetary gearbox can be as high as 332,000 Nm, and can be used in vehicles and industrial applications requiring medium to high torque. A planetary gear system is a great alternative to a traditional transmission. So, how does it work?
helical gearbox
The main difference between the helical gearbox and the spur gear is the center distance between the teeth. The helical gearbox has a larger pitch circle than the spur gear and thus requires a radial module. In addition, the two types of gears can only be made with the same tooth-cutting tool as the spur gear. However, the helical gearbox is more efficient in terms of production costs.
The helical gearbox is a low-power consumption, compact type of gearbox that is used for a wide range of industrial applications. They are highly durable and withstand high loads with utmost efficiency. The helical gearbox can be manufactured in cast steel and iron for small and medium units. This type of gearbox is also commonly used for crushers, conveyors, coolers, and other applications that need low power.
The helical gear has many advantages over the spur gear. It produces less noise. It has less friction and is less likely to wear out. It is also quieter than spur gears. This is because multiple teeth are in mesh. Because the teeth are in mesh, the load is distributed over a larger area, resulting in a smoother transition between gears. The reduction in noise and vibration reduces the risk of damaging the gear.
The helical gear’s axial excitation force is obtained using a linearized equation of motion in the rotational direction. The damping coefficient of the equation is 0.07. The helical gear is made up of a steel shaft with a diameter of 20 mm and a 5 mm thick aluminum plate. The stiffness of the bearing is 6.84 x 107 N/m. The damping force of the plate is 2,040 kg/m2/s.
The worm gearbox has a better efficiency ratio than the helical one, but it is less efficient in low-ratio applications. In general, worm gearboxes are more efficient than helical gearboxes, although there are some exceptions to this rule. A helical gearbox is better for applications that require high torque. It may also be more economical in the long run. If you are considering a helical gearbox, consider the advantages it has over worm gearboxes.
helical gear reducer
A helical gear reducer for a machine’s gearbox is an integral component of the drive system. This unit amplifies torque and controls speed and, therefore, compliments the engine by rotating slower than the engine’s input shaft. A helical gear reducer is a compact gearbox component that is used in industrial applications. A variety of sizes is available to suit various machine configurations. The following sections will discuss some of the different types available.
Designed by experts and engineers, a helical gear reducer is a surprisingly small and light gear that satisfies the needs of many machine applications. It features a large transmission torque, a low starting and running speed, and a fine classification of transmission ratios. A helical gear reducer is lightweight and easily connected to other gears, and it features a high technical content.
In order to avoid errors and poor performance, regular maintenance is a must. The proper lubrication of the gear reducer can minimize failures, errors, and poor performance. Every gear reducer manufacturer sells a suitable lubricant, which must match the properties of the machine’s drive mechanism. It is also advisable to check the lubrication regularly to avoid any deterioration of the unit’s performance.
While the worm gearbox may be better for applications where torque is high, the helical gear reducer offers greater efficiency at lower cost. Although worm gearboxes may be cheaper initially, they are less effective at higher ratios. Even if the worm gear is more expensive to buy, it still offers 94% efficiency, which makes it more cost-effective. There are some significant advantages to both types of gearboxes.
The main advantage of a helical gear reducer over a spur gear is its smoother operation. Unlike spur gears, which have teeth that are straight, helical gears have angled teeth that gradually engage with each other. This helps ensure that the gear does not grind or make excessive noise when it turns. Additionally, they are less commonly used in automation and precision machinery. They are often used in industrial applications.
Continuously variable transmission
A Continuously Variable Transmission (CVT) is an automatic transmission that can run through a vast number of gears. Unlike a standard automatic transmission, it can run at any speed, even at a low rev. The CVT is also capable of running at infinitely low gears. Its basic function is to provide different torque ratios to the engine. In addition to delivering power, CVTs have other benefits.
One of the major advantages of a CVT is its simplicity. Its simplicity translates into fewer moving parts, which means less maintenance. The CVT’s simplicity also means that it can handle a wide variety of different types of road conditions and driving styles. In addition to being a great alternative to a traditional automatic transmission, CVTs can be used on many other types of vehicles, including tractors, snowmobiles, motor scooters, and power tools.
A CVT is much smoother than a conventional automatic transmission. It never has to hunt for a gear. It also responds well to throttle inputs and speed changes. Both of these technologies are available on many modern vehicles, including the Nissan Rogue and Mazda CX-5. It’s important to note that each of these transmissions has its pros and cons. So, if you’re looking for a car with a CVT, make sure to read the reviews. They’ll help you decide which transmission is right for you.
Another advantage of a CVT is its fuel efficiency. Many cars now feature CVTs, and they’re becoming increasingly popular with automakers. In addition to fuel efficiency, most cars with CVTs also have a smoother ride. There’s no more sudden downshifts or gear hunting. This makes driving a lot easier. And, the added benefits of smoother driving make CVTs the ideal choice for many drivers.
Although a CVT is more common among Japanese car manufacturers, you’ll find CVTs on European car models as well. The Mercedes-Benz A-Class, B-Class, and Megane are some examples of vehicles that use this technology. Before making a decision, consider the reliability of the model in question. Consumer Reports is a good resource for this. It also offers a history of use and reliability for every type of car, including the Honda Accord.
China Good quality Heavy Duty Helical Gear Box with Cast Iron Housing for CZPT near me shop
Solution Description
Helical Bevel gearbox
H.B collection equipment models undertake forex format and could transform into speral reducer in accordance to customer’s necessity.
The housing of 1 dimension can comprehend parallel shaft,proper-angle shaft types and horizonal,vertical mounting modes.Range of factors is reducible,the amount of reducer’s mode is augmentable.
Sound-absorbable structure,big floor,big enthusiast lessen temperature and sounds,advanced grinding method of cylindrical gear and bevel gear boost stability and transmit electricity a lot more efficeintly.
Input method:motor linked flange,shaft enter.
Output manner:reliable shaft with flat essential,hollow shaft with flat key,hollow shaft with shrink disk,hollow or solid shaft with involute splines,solid shaft with flange.
Mounting mode:Foot-mounted,glange-mounted,swing base-mounted,torque-arm-mounted.
H.B sequence include size 3~26,quantity of levels is 1~4,ratio is 1.25~450,combing with R series and K sequence,ratio will be larger.
Substantial precision grade with Gleason and Hofler grinding machineBetter meshing of gearsTop manufacturers bearings and oil sealLong operate lifeLow noiseNo oil leakageCompact style, sturdy and solidBetter CZPT propertyCustomized design avaialbeDiversified assortment catering for electrical power.
RFQ
Q:Are you buying and selling firm or producer?
A: We are maker with more than 20 years’ knowledge.
Q: How prolonged is your delivery time?
A: Generally it is in ten days if the items are in stock, for goods created as per purchase, it is in 35 days after confirmation of buy.
Q: How long ought to I wait for the feedback soon after I ship the enquiry?
A: Typically inside of twelve several hours.
Q: What info must I give you to verify the solution?
A: Model/Size, Transmission Ratio, Velocity, Shaft directions & Buy amount and so on.
Q: Hong lengthy is your solution guarantee?
A: We offer twelve months guarantee from departure day of the products.
Q: What is your payment phrases? T/T one hundred% in CZPT for volume significantly less than USD10000.-, 30% T/T in CZPT , harmony ahead of shipment for sum above USD10000.
If you have any other inquiries, remember to truly feel free of charge to speak to us beneath:
HOW TO Make contact with US?
Deliver your Inquiry Particulars in the Beneath, click on “Ship” Now!
When looking at a reducer vs a gearbox, usually the only variation is terminology. This is due to the fact all reducers are gearboxes. Even so, not all gearboxes are retarders. This could sound challenging, but it’s in fact quite straightforward. A reducer is a gear set amongst the motor and the machine. The goal of the reducer is to lessen the rotational speed transferred between these two endpoints. The reducer amplifies and multiplies the torque (enter) made by the motor. Second, a reducer, as the title suggests, lowers the velocity of the enter (output in rpm) so that the output is the appropriate speed. The time period “gearbox” is just a generic phrase utilized for the equipment train in between the motor and the machine. Consequently, all reducers are gearboxes. Even so, not all gearboxes decrease input pace. Even though unusual, gearboxes can really improve input speeds. By considerably the most widespread variety of gearbox is a retarder, but it would be incorrect to say that all gearboxes are retarders.
We are seasoned transmission dealers and offer you a vast range of transmissions, an crucial element of many generate methods. Gearboxes can be utilized to minimize or increase speed, increase torque, reverse or alter the path of a drive shaft. Gearboxes are also acknowledged as equipment drives, speed reducers, gear motors, pace reducers and equipment reducers.
China high quality Parallel Shaft Helical Gear Box for CZPT Movement with Best Sales
Product Description
Company Profiles
-We are a major gear motor producer
ZHangZhoug Xihu (West Lake) Dis.hai Reducer is a major manufacturer of gear motor and gearbox.
Considering that 1991, we have specialised in manufacturing a vast selection of gear motor and gear box like:
- helical equipment motor
- helical bevel gear motor
- parallel shaft helical gear motor
- helical worm gear motor
- hoist push
- large-duty helical gearbox
- large-duty helical bevel gearbox
- equipment motor for auto parking system
- sprial bevel gearbox
Product Description
P sequence gear motor is composed with two-stage or 3-phase gears. Input shaft and output shaft is parallel.
Mounting placement: footed mounting, flange mounting, shaft mounting etc.
Technical knowledge:
output velocity: 10 ~ 752 rpm
rated output torque:10 ~ 20000 Nm
motor energy: 0.12 ~ two hundred KW
Solution Demonstrate
Product Specification
Product functions | |||||||
1. P sequence parallel shaft helical equipment motor are the excellent remedy when installation room is minimal underneath the exact same permitted torque. | |||||||
2. Little vibration and minimal sound, with high transmission efficiency. | |||||||
3. The several various sizes and designs guarantee that the gearmotors can be utilised in a extensive range of purposes even underneath the most unfavorable conditions,typically used in conveyor and materials processing purposes. | |||||||
General Specialized data | |||||||
Housing material | HT250 high-energy forged iron | ||||||
Housing hardness | HBS190-240 | ||||||
Pinion substance | 20CrMnTiH | ||||||
Gear materials | 20CrMnTiH | ||||||
Surface hardness of gears | HRC58°~62 ° | ||||||
Gear core hardness | HRC33~40 | ||||||
Input/output shaft materials | 40CrMnTiH | ||||||
Input / Output shaft hardness | HRC25~thirty | ||||||
Machining precision of gears | accurate grinding, 6~7 Quality | ||||||
Lubricating oil | GB L-CKC220 | ||||||
Heat remedy | tempering, cementiting, quenching, and many others. | ||||||
Efficiency | 94%~ninety six% (is dependent on the transmission stage) | ||||||
Noise (MAX) | 60~68dB | ||||||
Temp. rise (MAX) | 40°C | ||||||
Temp. rise (Oil)(MAX) | 50°C | ||||||
Vibration | ≤20µm | ||||||
Backlash | ≤20Arcmin | ||||||
Brand of bearings | China Top brand C&U,LYC,TMB or other brands asked for, SKF….. | ||||||
Brand of oil seal | CTY— ZheJiang or other manufacturers asked for | ||||||
P —- sequence parallel shaft helical equipment motor | |||||||
P-collection single levels | |||||||
Model | Output Shaft Dia. | Center Height | Output Flange Dia. | Power | Ratio | Permitted Torque | Output Speed |
Strong (mm) | (mm) | (mm) | (kw) | (Nm) | (RPM) | ||
P37 | 25k6 | 112h13 | 110/160 | .12~3 | three.88~130 | 240 | ten~374 |
P47 | 30k6 | 128.1h13 | one hundred thirty/200 | .twelve~three | nine.fifteen~622 | 435 | two.2~157 |
P57 | 35k6 | 136h13 | a hundred and eighty/250 | .12~5.5 | five.21~two hundred | 605 | 6.5~276 |
P67 | 40k6 | 159.5h13 | one hundred eighty/250 | .18~5.5 | four.14~225 | 830 | 5.7~360 |
P77 | 50k6 | 200h13 | 230/three hundred | .twenty five~11 | four.28~280 | 1720 | three.1~336 |
P87 | 60m6 | 246.7h13 | 250/350 | .37~22 | four.thirteen~1300 | 3060 | 1.1~356 |
P97 | 70m6 | 285h13 | 350/450 | one.1~thirty | 4.52~253 | 4400 | 3.6~131 |
P107 | 90m6 | 332.4h13 | 350/450 | one.1~45 | six.29~253 | 8990 | two.7~236 |
P127 | 110m6 | 382.6h13 | 450/550 | 4.~90 | four.84~176 | 13800 | 4.2~316 |
P157 | 120m6 | 447h13 | 550/660 | 5.5~200 | 12.5~207 | 25710 | 3.3~125 |
P collection double stages | |||||||
Model | Output Shaft Dia. | Centre Peak | Output Flange Dia. | Power | Ratio | Permitted Torque | Output Speed |
Strong (mm) | (mm) | (mm) | (kw) | (Nm) | (RPM) | ||
P37D17 | 25k6 | 112h13 | one hundred ten/160 | .12~.18 | 129~322 | 190 | 4~10 |
P47D17 | 30k6 | 128.1h13 | 130/two hundred | .12~.18 | 178~622 | four hundred | 2.2~7.four |
P57D37 | 35k6 | 136h13 | one hundred eighty/250 | .12~.37 | 134~967 | 615 | one.4~10 |
P67D37 | 40k6 | 159.5h13 | 180/250 | .12~.fifty five | one hundred seventy five~1429 | 900 | .9~eight |
P77D37 | 50k6 | 200h13 | 230/300 | .twelve~.seventy five | 280~2613 | 1690 | .fifty one~4.nine |
P87D57 | 60m6 | 246.7h13 | 250/350 | .12~1.five | 249~4954 | 3070 | .28~5.7 |
P97D57 | 70m6 | 285h13 | 350/450 | .twelve~2.2 | 363~7348 | 4390 | .19~3.9 |
P107D77 | 90m6 | 332.4h13 | 350/450 | .twelve~4. | 255~14767 | 9630 | .09~5.6 |
P127D77 | 110m6 | 382.6h13 | 450/550 | .twelve~5.5 | 376~22323 | 13500 | .06-3.8 |
P127D87 | 110m6 | 382.6h13 | 450/550 | five.5~eleven | 166~418 | 13500 | 3.4~8.seven |
P157D97 | 120m6 | 447h13 | 550/660 | .fifty five~11 | 197~6295 | 19710 | .22~7.three |
Remarks: you should refer to our catalogue or question for revenue gentleman when your technical demands is unique. |
Bundle
Plastic bag + wooden carton
Certificate
FAQ
Q: Can you print other colours?
Yes. Custom-made shade can be printed on the equipment motor in accordance to your requirements.
Q: Is that factory price?
Indeed. We CZPT you all rates are based on manufacturing facility.
Q: What is the daily life span? what is the assure
The lifespan of equipment motor can reach 5-20 years based on various functioning situations .The promise time is 1 yr soon after shipping.
Q: What documents are available?
A entire assortment paperwork such as structural drawings, packing checklist, installation manual and relative certificates can be provided. In addition, customs declaration is provided. We supply 1-cease support for you.
Q: Is it in a position to custom-made?
yes, we could re-layout and make the equipment motor as your specifications if the amount is huge.
Equipment reducers, also named reducers, occur in several transmission styles and are made to multiply torque and reduce enter velocity to a wanted output pace. The major benefit of inline gearboxes is their ability to preserve control in applications involving high rotational speeds. Their performance and potential to offer higher input speeds with minimum backlash make inline reducer gearboxes perfect for a wide assortment of motion control apps
Under is a checklist of our presently available industrial gearboxes. If you can’t find what you are hunting for, remember to speak to the manufacturing unit for far more choices. At EP, we are continuously building new items and retrofitting old ones to satisfy consumer demands.
China wholesaler Power Transmission Parts Kpc Helical Gear Box for Electric Motor near me manufacturer
Item Description
Merchandise Description
KPC Collection helical gearbox is a new generation product which designed basing on the modular method, It can be related respectively with motors this kind of as IEC standard motor, brake motor, explosion-evidence motor, frequency motor, servo motor and so on. it has 4 types(01-02-03-04),electrical power from .12kw to 4.0kw, ratio from 3.sixty six to 58.09, Max torque from 120Nm to 500Nm.It can be link discretionary(foot or flange) and use multi-mounting positions accordingly. This item is commonly employed in textile, foodstuff, beverage,tobacco, CZPT industrial fields,and so on.
Item Attributes
- Modular development
- Higher efficiency
- Precise grinding, low sound
- Compact structural design
- Univeral mounting
- Aluminium housing, mild in bodyweight
- Carbonize and grinding hardened gears, durable
- Multi-composition, can be combined in diverse types to fulfill numerous transmission condition
Installation:
1.Foot mounted
2.Output Flange mounted
3.B14 Flange mounted
Designs:
1.KPC..P(Foot-mounted): KPC01P,KPC02P,KPC03P,KPC04P
2.KPCF..P(Output Flange-mounted): KPCF01P,KPCF02P,KPCF03P,KPCF04P
3.KPCZ..P(B14 Flange-mounted): KPCZ01P,KPCZ02P,KPCZ03P,KPCZ04P
Detailed Images
Merchandise Parameters
GEARBOX Selecting TABLES | |||||||||
KPC01.. | n1=1400r/min | 120Nm | |||||||
n2 | M2max | Fr2 | i | Proportion | 63B5 | 71B5/B14 | 80B5/B14 | 90B5/B14 | |
[r/min] | [Nm] | [N] | |||||||
26 | one hundred twenty | 2600 | 53.33 | a hundred and sixty/3 | |||||
31 | a hundred and twenty | 2600 | forty five.89 | 413/nine | |||||
35 | 120 | 2600 | forty.10 | 3248/81 | |||||
39 | one hundred twenty | 2560 | 35.47 | 532/15 | |||||
forty nine | one hundred twenty | 2380 | 28.50 | 770/27 | |||||
fifty nine | a hundred and twenty | 2230 | 23.56 | 212/9 | |||||
seventy one | 120 | 2100 | 19.83 | 119/6 | |||||
78 | 90 | 2030 | seventeen.86 | 1357/seventy six | |||||
96 | a hundred and twenty | 1900 | fourteen.62 | 658/45 | |||||
a hundred and one | 90 | 1860 | thirteen.eighty* | 69/five | |||||
118 | 120 | 1770 | 11.90 | 2464/207 | |||||
143 | a hundred and twenty | 1660 | 9.81 | 1148/117 | |||||
153 | 80 | 1630 | nine.17 | 1219/133 | |||||
181 | 80 | 1540 | 7.72 | 1173/152 | |||||
246 | 70 | 1390 | 5.69 | 1081/a hundred ninety | |||||
302 | 70 | 1290 | four.63 | 88/19 | |||||
366 | 70 | 1210 | 3.82 | 943/247 | |||||
KPC02.. | n1=1400r/min | 200Nm | |||||||
n2 | M2max | Fr2 | i | Proportion | 63B5 | 71B5/B14 | 80B5/B14 | 90B5/B14 | |
[r/min] | [Nm] | [N] | |||||||
26 | two hundred | 4500 | fifty four.00* | 54/1 | |||||
thirty | 200 | 4500 | forty six.46* | 3717/80 | |||||
34 | 200 | 4500 | 40.sixty* | 203/5 | |||||
39 | 200 | 4270 | 35.91* | 3591/100 | |||||
48 | two hundred | 3970 | 28.88* | 231/8 | |||||
fifty nine | two hundred | 3730 | 23.85* | 477/20 | |||||
70 | 200 | 3520 | 20.08* | 3213/a hundred and sixty | |||||
eighty two | 140 | 3330 | seventeen.10 | 3009/176 | |||||
95 | two hundred | 3180 | fourteen.eighty one* | 2961/200 | |||||
106 | a hundred and forty | 3060 | thirteen.21 | 2907/220 | |||||
116 | 200 | 2970 | twelve.05 | 1386/a hundred and fifteen | |||||
141 | two hundred | 2780 | 9.93 | 2583/260 | |||||
159 | 120 | 2670 | 8.78 | 2703/308 | |||||
189 | 120 | 2520 | 7.39 | 2601/352 | |||||
257 | one hundred | 2280 | five.45 | 2397/440 | |||||
316 | a hundred | 2120 | 4.43 | 102/23 | |||||
383 | 80 | 1990 | 3.66 | 2091/572 | |||||
KPC03.. | n1=1400r/min | 300Nm | |||||||
n2 | M2max | Fr2 | i | Proportion | 71B5/B14 | 80B5/B14 | 90B5/B14 | 100B5/B14 | 112B5/B14 |
[r/min] | [Nm] | [N] | |||||||
24 | three hundred | 6000 | fifty eight.09 | 639/eleven | |||||
28 | three hundred | 6000 | 50.02 | 2201/44 | |||||
32 | 300 | 6000 | forty three.75 | 4331/ninety nine | |||||
36 | three hundred | 6000 | 38.73 | 426/eleven | |||||
40 | 300 | 5860 | 34.62 | 4189/121 | |||||
forty nine | 300 | 5480 | 28.30 | 4047/143 | |||||
64 | 280 | 5571 | 21.78 | 1917/88 | |||||
81 | 280 | 4660 | seventeen.33 | 3621/209 | |||||
93 | 260 | 4440 | fifteen.06 | 497/33 | |||||
113 | 260 | 4160 | 12.37 | 1633/132 | |||||
136 | 240 | 3910 | 10.28 | 3053/297 | |||||
177 | one hundred eighty | 3590 | seven.93 | 1269/160 | |||||
222 | one hundred eighty | 3320 | six.31 | 2397/380 | |||||
255 | a hundred and fifty | 3170 | five.48 | 329/60 | |||||
311 | a hundred and fifty | 2970 | 4.50 | 1081/240 | |||||
374 | one hundred fifty | 2790 | 3.74 | 2571/540 | |||||
KPC04.. | n1=1400r/min | 500Nm | |||||||
n2 | M2max | Fr2 | i | Proportion | 80B5/B14 | 90B5/B14 | 100B5/B14 | 112B5/B14 | |
[r/min] | [Nm] | [N] | |||||||
24 | 500 | 8000 | 58.09 | 639/eleven | |||||
28 | 500 | 8000 | fifty.02 | 2201/44 | |||||
32 | five hundred | 8000 | 43.75 | 4331/99 | |||||
36 | 500 | 8000 | 38.73 | 426/eleven | |||||
40 | 500 | 7950 | 34.62 | 4189/121 | |||||
49 | five hundred | 7430 | 28.30 | 4047/143 | |||||
64 | 480 | 6810 | 21.78 | 1917/88 | |||||
eighty one | 480 | 6310 | seventeen.33 | 3621/209 | |||||
93 | 460 | 6571 | 15.06 | 497/33 | |||||
113 | 460 | 5640 | twelve.37 | 1633/132 | |||||
136 | 440 | 5300 | ten.28 | 3053/297 | |||||
177 | 260 | 4860 | seven.93 | 1269/160 | |||||
222 | 260 | 4510 | six.31 | 2397/380 | |||||
255 | 230 | 4300 | five.48 | 329/60 | |||||
311 | 230 | 4030 | four.50 | 1081/240 | |||||
374 | two hundred | 3780 | three.seventy four | 2571/540 |
Define Dimension:
Business Profile
About our company:
We are a professional reducer maker positioned in HangZhou, ZHangZhoug province.Our top items is full assortment of RV571-a hundred and fifty worm reducers , also supplied hypoid helical gearbox, Laptop units, UDL Variators and AC Motors.Goods are commonly used for programs this kind of as: foodstuffs, ceramics, packing, chemicals, pharmacy, plastics, paper-generating, design machinery, metallurgic mine, environmental protection engineering, and all varieties of automatic traces, and assembly lines.With fast delivery, excellent following-revenue service, sophisticated creating facility, our products market well both at residence and overseas. We have exported our reducers to Southeast Asia, Eastern Europe and Center East and so on.Our intention is to develop and innovate on foundation of higher high quality, and develop a good popularity for reducers.
Packing information:Plastic Baggage+Cartons+Picket Cases , or on request
We take part Germany Hannver Exhibition-ZheJiang PTC Truthful-Turkey Get Eurasia
Logistics
We can dispatch items by sea, by prepare, by air according to client instruction
Soon after Product sales Support
one.Routine maintenance Time and Warranty:Within 1 yr right after acquiring items.
two.Other Support: Including modeling choice guide, installation guidebook, and dilemma resolution information, etc.
FAQ
one.Q:Can you make as for each customer drawing?
A: Indeed, we supply custom-made provider for buyers appropriately. We can use customer’s nameplate for gearboxes.
2.Q:What is your phrases of payment ?
A: thirty% deposit prior to generation,harmony T/T just before shipping.
three.Q:Are you a trading business or company?
A:We are a manufacurer with innovative tools and seasoned employees.
4.Q:What’s your creation capacity?
A:8000-9000 PCS/Thirty day period
5.Q:Free of charge sample is available or not?
A:Indeed, we can offer cost-free sample if buyer concur to shell out for the courier value
six.Q:Do you have any certification?
A:Sure, we have CE certificate and SGS certification report.
Make contact with details:
Ms Lingel Pan
For any questions just feel totally free ton contact me. A lot of many thanks for your kind attention to our company!
These compact, light-weight, lower backlash inline equipment reducers were initially made for encoder purposes. They are also suitable for numerous other drive systems. Encoder equipment reducers have a very minimal moment of inertia at the shaft input and are rated for enter speeds up to 3000 rpm. Two frame sizes are offered with gear ratios from 4.96:1 to 3600:1. Our encoder gearbox sync pads are offered from inventory.
When searching at a reducer vs a gearbox, usually the only big difference is terminology. This is because all reducers are gearboxes. Nevertheless, not all gearboxes are retarders. This may possibly audio complex, but it’s actually fairly straightforward. A reducer is a equipment established among the motor and the device. The purpose of the reducer is to reduce the rotational velocity transferred between these two endpoints. The reducer amplifies and multiplies the torque (input) made by the motor. Next, a reducer, as the title implies, reduces the velocity of the input (output in rpm) so that the output is the right pace. The phrase “gearbox” is just a generic term used for the gear train between the motor and the machine. Consequently, all reducers are gearboxes. Nevertheless, not all gearboxes reduce input pace. Even though unusual, gearboxes can really improve input speeds. By considerably the most widespread type of gearbox is a retarder, but it would be incorrect to say that all gearboxes are retarders.
in Almaty Kazakhstan sales price shop near me near me shop factory supplier Gearbox Housing Reducer Motor Helical Gear Box for Automatic Transmission and Forklift Assembly Available manufacturer best Cost Custom Cheap wholesaler
We are aiming to meet up with the demands of the clients close to the world.. our products are marketing nicely in the American, European, South American and Asian markets. Our specialists and engineers have 23 several years of Expertise in the Bearing Sector. **What we can do?**
EPTTngdao EPTT Automobile arts EPTT, Ltd. is a present day EPTT manufacturer mainly engaged in the production of parts needed for vehicles, EPTs, EPTT resources, trains and other mechanical gear. We have a variety of casting processes this sort of as Iron based mostly coated sand, Coated sand, Coated sand, Clay sand, Resin sand, expenditure casting, misplaced-foam casting, damaging pressure casting, and many others. At the very same time, we have a full present day production line from uncooked material melting to finished item.