Product Description
Product Parameters
S series geared motor speed reducer with 90 Degree Gear box
Components:
1. Housing: Cast Iron
2. Gears: Helical-worm Gears
3. Input Configurations: Equipped with Electric Motors
Solid Shaft Input, IEC-normalized Motor Flange
4. Applicable Motors:
Single Phase AC Motor, Three Phase AC Motor
Brake Motors, Inverter Motors
Multi-speed Motors, Explosion-proof Motor
Roller Motor
5. Output Configurations: CZPT Shaft Output
Hollow Shaft Output.
Features:
1. Modular design, compact structure
2. Low noise
3. Hollow output shaft with keyed connection, shrink disk, or torque arm
4. Can be combined with other types of gearboxes (Such as R Series, UDL Series)
Models |
Output Shaft Dia. |
Input Shaft Dia. |
Power(kW) |
Ratio |
Max. Torque(Nm) |
|
Solid Shaft |
Hollow Shaft |
|||||
S38 |
20mm |
20mm |
16mm |
0.18~0.75 |
10.27~152 |
90 |
S48 |
25mm |
25/30mm |
16mm |
0.18~1.5 |
11.46~244.74 |
170 |
S58 |
30mm |
30/35mm |
16mm |
0.18~3 |
10.78~196.21 |
295 |
S68 |
35mm |
40/45mm |
19mm |
0.25~5.5 |
11.55~22 |
520 |
S78 |
45mm |
50/60mm |
24mm |
0.55~7.5 |
9.96~241.09 |
1270 |
S88 |
60mm |
60/70mm |
28mm |
0.75~15 |
11.83~222 |
2280 |
S98 |
70mm |
70/90mm |
38mm |
1.5~22 |
12.75~230.48 |
4000 |
Hardness: | Hardened Tooth Surface |
---|---|
Installation: | 90 Degree |
Layout: | Expansion |
Gear Shape: | Bevel Gear |
Step: | Single-Step |
Type: | Gear Reducer |
Samples: |
US$ 150/Piece
1 Piece(Min.Order) | |
---|
Maintenance Tips for Prolonging the Life of a Worm Gearbox
Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:
- Lubrication: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
- Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
- Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
- Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
- Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
- Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
- Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
- Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
- Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
- Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
How to Calculate the Efficiency of a Worm Gearbox
Calculating the efficiency of a worm gearbox involves determining the ratio of output power to input power. Efficiency is a measure of how well the gearbox converts input power into useful output power without losses. Here’s how to calculate it:
- Step 1: Measure Input Power: Measure the input power (Pin) using a power meter or other suitable measuring equipment.
- Step 2: Measure Output Power: Measure the output power (Pout) that the gearbox is delivering to the load.
- Step 3: Calculate Efficiency: Calculate the efficiency (η) using the formula: Efficiency (η) = (Output Power / Input Power) * 100%
For example, if the input power is 1000 watts and the output power is 850 watts, the efficiency would be (850 / 1000) * 100% = 85%.
It’s important to note that efficiencies can vary based on factors such as gear design, lubrication, wear, and load conditions. The calculated efficiency provides insight into how effectively the gearbox is converting power, but it’s always a good practice to refer to manufacturer specifications for gearbox efficiency ratings.
Preventing Backlash in a Worm Gearbox
Backlash in a worm gearbox can lead to reduced accuracy, positioning errors, and decreased overall efficiency. Here are steps to prevent or minimize backlash:
- High-Quality Components: Use high-quality worm gears and worm wheels with tight manufacturing tolerances. Precision components will help reduce backlash.
- Proper Meshing: Ensure the worm gear and worm wheel are properly aligned and meshed. Improper meshing can lead to increased backlash.
- Preload: Applying a small amount of preload to the worm gear can help reduce backlash. However, excessive preload can increase friction and wear.
- Anti-Backlash Mechanisms: Consider using anti-backlash mechanisms, such as spring-loaded systems or adjustable shims, to compensate for any inherent backlash.
- Lubrication: Proper lubrication can reduce friction and play a role in minimizing backlash. Use a lubricant that provides good film strength and reduces wear.
- Maintenance: Regularly inspect and maintain the gearbox to identify and address any changes in backlash over time.
It’s important to strike a balance between reducing backlash and maintaining smooth operation. Consulting with gearbox experts and following manufacturer guidelines will help you optimize your worm gearbox’s performance while minimizing backlash.
editor by CX 2023-09-06
China wholesaler Helical Gearbox Inline Helical Gear Box Bevel Worm Reduction Shaft Mounted Parallel Manufacturers Industrial Coaxial Two Stage Unit Crane Duty Helical Gearbox automatic gearbox
Product Description
Helical Gearbox inline helical gear box bevel worm reduction Shaft Mounted parallel manufacturers industrial coaxial 2 stage unit crane duty Helical Gearbox
helical concentric gearbox speed reducer decelerator has the features of high versatility,good combination and heavy loading capability, along with other merits such as easy to attain various transmission ratios, high efficiency, low vibrationand high permissible axis radial load. This series can not only be combined with various kinds of reducers and variators and meet the requirements, but also beadvantage of localization of related transmission equipment.
1) Output speed: 0.6~1,571rpm
2) Output torque: up to 18,000N.m
3) Motor power: 0.18~160kW
4) Mounted form: foot-mounted and flange-mounted mounting
Product Name | SLR Series Rigid Tooth helical reducer |
Gear Material | 20CrMnTi |
Case Material | HT250 |
Shaft Material | 20CrMnTi |
Gear Processing | Grinding finish by HOFLER Grinding Machines |
Color | Customized |
Noise Test | Bellow 65dB |
Aspect | Worm Gearbox | Helical Gearbox |
Efficiency | Lower efficiency due to sliding friction between the worm and worm wheel. | Higher efficiency due to rolling contact between helical gear teeth. |
Torque Transmission | Excellent torque transmission and high reduction ratios achievable in a single stage. | Good torque transmission, but may require multiple stages for high reduction ratios. |
Noise and Vibration | Generally higher noise and vibration levels due to sliding action. | Lower noise and vibration levels due to smoother rolling contact. |
Backlash | Higher inherent backlash due to the design. | Lower backlash due to meshing of helical teeth. |
Efficiency at Higher Speeds | Less suitable for high-speed applications due to efficiency loss. | More suitable for high-speed applications due to higher efficiency. |
Overload Protection | Natural self-locking feature provides some overload protection. | May not have the same level of inherent overload protection. |
Applications | Commonly used for applications requiring high reduction ratios, such as conveyor systems and heavy-duty machinery. | Widely used in various applications including automotive transmissions, industrial machinery, and more. |
Both worm and helical gearboxes have their place in engineering, and the choice between them depends on the specific requirements of the application. Worm gearboxes are preferred for applications with high reduction ratios, while helical gearboxes are chosen for their higher efficiency and smoother operation.
Samples: |
US$ 9999/Piece
1 Piece(Min.Order) | |
---|
How Does a Worm Gearbox Compare to Other Types of Gearboxes?
Worm gearboxes offer unique advantages and characteristics that set them apart from other types of gearboxes. Here’s a comparison between worm gearboxes and some other common types:
- Helical Gearbox: Worm gearboxes have higher torque multiplication, making them suitable for heavy-load applications, while helical gearboxes are more efficient and offer smoother operation.
- Bevel Gearbox: Worm gearboxes are compact and can transmit motion at right angles, similar to bevel gearboxes, but worm gearboxes have self-locking capabilities.
- Planetary Gearbox: Worm gearboxes provide high torque output and are cost-effective for applications with high reduction ratios, whereas planetary gearboxes offer higher efficiency and can handle higher input speeds.
- Spur Gearbox: Worm gearboxes have better shock load resistance due to their sliding motion, while spur gearboxes are more efficient and suitable for lower torque applications.
- Cycloidal Gearbox: Cycloidal gearboxes have hig
Does a Worm Reducer Require Frequent Maintenance?
Worm reducers generally require less frequent maintenance compared to some other types of gearboxes due to their design and operating characteristics. However, maintenance is still essential to ensure optimal performance and longevity. Here are some key points to consider:
- Lubrication: Proper lubrication is crucial for worm gearboxes. Regularly check the lubricant level and quality to prevent wear and overheating. Lubricant should be changed as recommended by the manufacturer.
- Inspections: Periodically inspect the gearbox for signs of wear, damage, or oil leaks. Check for any unusual noises, vibrations, or changes in performance that could indicate a problem.
- Tightening and Alignment: Check and tighten any loose fasteners and ensure that the gearbox is properly aligned. Misalignment can lead to increased wear and reduced efficiency.
- Seal Maintenance: Inspect and maintain seals to prevent oil leakage and contaminants from entering the gearbox.
- Cleaning: Keep the gearbox clean from debris and contaminants that could affect its performance. Regular cleaning can prevent premature wear and damage.
- Load and Speed: Ensure that the gearbox is operating within its rated load and speed limits. Exceeding these limits can lead to accelerated wear and potential failure.
- Environmental Conditions: Consider the operating environment of the gearbox. Extreme temperatures, humidity, and other factors can impact the gearbox’s performance and longevity.
While worm gearboxes are known for their durability and self-locking feature, neglecting maintenance can lead to premature wear, reduced efficiency, and potential breakdowns. Following the manufacturer’s recommendations for maintenance intervals and procedures is essential to keep the worm reducer in optimal condition.
h shock load capacity and compact design, but worm gearboxes are more cost-effective and can handle higher reduction ratios.
While worm gearboxes have advantages such as high torque output, compact design, and self-locking capability, the choice between gearbox types depends on the specific requirements of the application, including torque, efficiency, speed, and space limitations.
editor by CX 2023-08-16
China OEM R F K S Series Parallel Shaft Inline Gear Box Speed Reducer Reducer Worm Bevel Helical Geared Motor Gearbox comer gearbox
Product Description
HUAKE Hot Selling KA series gear box reducer geared motor reductor made in china
K series product performance
High transmission efficiency, low energy consumption and superior performance. High rigidity cast iron box with ribs; hard-toothed gears are made of high-quality alloy steel, the surface is carburized and quenched and hardened, and the teeth are finely machined, with stable transmission, low noise, large bearing capacity, low temperature rise and long service life.
Product Parameters
Brand Name |
HUAKE |
Product Name |
K Helical-bevel gear units |
Material |
Steel or cast iron |
Weight |
11Kg-1700Kg |
Color |
Customizable |
Heat treatment |
Carburising,Quenching,Gear Grinding |
Advantage |
1.K series spiral bevel gear reducer with small vibration, low noise, energy saving. 2.Selection of high quality steel material, steel cast iron box, gear surface after high frequency heat treatment. |
Product Description
Our process of production
Our product line
Hardness: | Hardened Tooth Surface |
---|---|
Installation: | 90 Degree |
Layout: | Expansion |
Gear Shape: | Bevel Gear |
Step: | Single-Step |
Type: | Gear Reducer |
Samples: |
US$ 1000/Piece
1 Piece(Min.Order) | |
---|
Lubrication Requirements for a Worm Gearbox
Lubrication is crucial for maintaining the performance and longevity of a worm gearbox. Here are the key considerations for lubricating a worm gearbox:
- Type of Lubricant: Use a high-quality, high-viscosity lubricant specifically designed for worm gearboxes. Worm gearboxes require lubricants with additives that provide proper lubrication and prevent wear.
- Lubrication Interval: Follow the manufacturer’s recommendations for lubrication intervals. Regularly check the gearbox’s temperature and oil condition to determine the optimal frequency of lubrication.
- Oil Level: Maintain the proper oil level to ensure effective lubrication. Too little oil can lead to insufficient lubrication, while too much oil can cause overheating and foaming.
- Lubrication Points: Identify all the lubrication points on
Maintenance Tips for Prolonging the Life of a Worm Gearbox
Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:
- Lubrication: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
- Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
- Temperature Monitoring: Keep an eye on the operating temperature
How to Calculate the Efficiency of a Worm Gearbox
Calculating the efficiency of a worm gearbox involves determining the ratio of output power to input power. Efficiency is a measure of how well the gearbox converts input power into useful output power without losses. Here’s how to calculate it:
- Step 1: Measure Input Power: Measure the input power (Pin) using a power meter or other suitable measuring equipment.
- Step 2: Measure Output Power: Measure the output power (Pout) that the gearbox is delivering to the load.
- Step 3: Calculate Efficiency: Calculate the efficiency (η) using the formula: Efficiency (η) = (Output Power / Input Power) * 100%
For example, if the input power is 1000 watts and the output power is 850 watts, the efficiency would be (850 / 1000) * 100% = 85%.
It’s important to note that efficiencies can vary based on factors such as gear design, lubrication, wear, and load conditions. The calculated efficiency provides insight into how effectively the gearbox is converting power, but it’s always a good practice to refer to manufacturer specifications for gearbox efficiency ratings.
of the gearbox. Excessive heat can degrade the lubricant and damage components.
- Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
- Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
- Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
- Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
- Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
- Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
- Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
the gearbox, including the worm and wheel gear surfaces. Apply the lubricant evenly to ensure complete coverage.
- Temperature: Consider the operating temperature of the gearbox. Some lubricants have temperature limits, and extreme temperatures can affect lubricant viscosity and performance.
- Cleanliness: Keep the gearbox and the surrounding area clean to prevent contaminants from entering the lubricant. Use proper filtration and seals to maintain a clean environment.
- Monitoring: Regularly monitor the gearbox’s temperature, noise level, and vibration to detect any signs of inadequate lubrication or other issues.
Proper lubrication will reduce friction, wear, and heat generation, ensuring smooth and efficient operation of the worm gearbox. Always refer to the manufacturer’s guidelines for lubrication specifications and intervals.
editor by CX 2023-08-14
China high quality Parallel Shaft Helical Gear Box for CZPT Movement with Best Sales
Product Description
Company Profiles
-We are a major gear motor producer
ZHangZhoug Xihu (West Lake) Dis.hai Reducer is a major manufacturer of gear motor and gearbox.
Considering that 1991, we have specialised in manufacturing a vast selection of gear motor and gear box like:
- helical equipment motor
- helical bevel gear motor
- parallel shaft helical gear motor
- helical worm gear motor
- hoist push
- large-duty helical gearbox
- large-duty helical bevel gearbox
- equipment motor for auto parking system
- sprial bevel gearbox
Product Description
P sequence gear motor is composed with two-stage or 3-phase gears. Input shaft and output shaft is parallel.
Mounting placement: footed mounting, flange mounting, shaft mounting etc.
Technical knowledge:
output velocity: 10 ~ 752 rpm
rated output torque:10 ~ 20000 Nm
motor energy: 0.12 ~ two hundred KW
Solution Demonstrate
Product Specification
Product functions | |||||||
1. P sequence parallel shaft helical equipment motor are the excellent remedy when installation room is minimal underneath the exact same permitted torque. | |||||||
2. Little vibration and minimal sound, with high transmission efficiency. | |||||||
3. The several various sizes and designs guarantee that the gearmotors can be utilised in a extensive range of purposes even underneath the most unfavorable conditions,typically used in conveyor and materials processing purposes. | |||||||
General Specialized data | |||||||
Housing material | HT250 high-energy forged iron | ||||||
Housing hardness | HBS190-240 | ||||||
Pinion substance | 20CrMnTiH | ||||||
Gear materials | 20CrMnTiH | ||||||
Surface hardness of gears | HRC58°~62 ° | ||||||
Gear core hardness | HRC33~40 | ||||||
Input/output shaft materials | 40CrMnTiH | ||||||
Input / Output shaft hardness | HRC25~thirty | ||||||
Machining precision of gears | accurate grinding, 6~7 Quality | ||||||
Lubricating oil | GB L-CKC220 | ||||||
Heat remedy | tempering, cementiting, quenching, and many others. | ||||||
Efficiency | 94%~ninety six% (is dependent on the transmission stage) | ||||||
Noise (MAX) | 60~68dB | ||||||
Temp. rise (MAX) | 40°C | ||||||
Temp. rise (Oil)(MAX) | 50°C | ||||||
Vibration | ≤20µm | ||||||
Backlash | ≤20Arcmin | ||||||
Brand of bearings | China Top brand C&U,LYC,TMB or other brands asked for, SKF….. | ||||||
Brand of oil seal | CTY— ZheJiang or other manufacturers asked for | ||||||
P —- sequence parallel shaft helical equipment motor | |||||||
P-collection single levels | |||||||
Model | Output Shaft Dia. | Center Height | Output Flange Dia. | Power | Ratio | Permitted Torque | Output Speed |
Strong (mm) | (mm) | (mm) | (kw) | (Nm) | (RPM) | ||
P37 | 25k6 | 112h13 | 110/160 | .12~3 | three.88~130 | 240 | ten~374 |
P47 | 30k6 | 128.1h13 | one hundred thirty/200 | .twelve~three | nine.fifteen~622 | 435 | two.2~157 |
P57 | 35k6 | 136h13 | a hundred and eighty/250 | .12~5.5 | five.21~two hundred | 605 | 6.5~276 |
P67 | 40k6 | 159.5h13 | one hundred eighty/250 | .18~5.5 | four.14~225 | 830 | 5.7~360 |
P77 | 50k6 | 200h13 | 230/three hundred | .twenty five~11 | four.28~280 | 1720 | three.1~336 |
P87 | 60m6 | 246.7h13 | 250/350 | .37~22 | four.thirteen~1300 | 3060 | 1.1~356 |
P97 | 70m6 | 285h13 | 350/450 | one.1~thirty | 4.52~253 | 4400 | 3.6~131 |
P107 | 90m6 | 332.4h13 | 350/450 | one.1~45 | six.29~253 | 8990 | two.7~236 |
P127 | 110m6 | 382.6h13 | 450/550 | 4.~90 | four.84~176 | 13800 | 4.2~316 |
P157 | 120m6 | 447h13 | 550/660 | 5.5~200 | 12.5~207 | 25710 | 3.3~125 |
P collection double stages | |||||||
Model | Output Shaft Dia. | Centre Peak | Output Flange Dia. | Power | Ratio | Permitted Torque | Output Speed |
Strong (mm) | (mm) | (mm) | (kw) | (Nm) | (RPM) | ||
P37D17 | 25k6 | 112h13 | one hundred ten/160 | .12~.18 | 129~322 | 190 | 4~10 |
P47D17 | 30k6 | 128.1h13 | 130/two hundred | .12~.18 | 178~622 | four hundred | 2.2~7.four |
P57D37 | 35k6 | 136h13 | one hundred eighty/250 | .12~.37 | 134~967 | 615 | one.4~10 |
P67D37 | 40k6 | 159.5h13 | 180/250 | .12~.fifty five | one hundred seventy five~1429 | 900 | .9~eight |
P77D37 | 50k6 | 200h13 | 230/300 | .twelve~.seventy five | 280~2613 | 1690 | .fifty one~4.nine |
P87D57 | 60m6 | 246.7h13 | 250/350 | .12~1.five | 249~4954 | 3070 | .28~5.7 |
P97D57 | 70m6 | 285h13 | 350/450 | .twelve~2.2 | 363~7348 | 4390 | .19~3.9 |
P107D77 | 90m6 | 332.4h13 | 350/450 | .twelve~4. | 255~14767 | 9630 | .09~5.6 |
P127D77 | 110m6 | 382.6h13 | 450/550 | .twelve~5.5 | 376~22323 | 13500 | .06-3.8 |
P127D87 | 110m6 | 382.6h13 | 450/550 | five.5~eleven | 166~418 | 13500 | 3.4~8.seven |
P157D97 | 120m6 | 447h13 | 550/660 | .fifty five~11 | 197~6295 | 19710 | .22~7.three |
Remarks: you should refer to our catalogue or question for revenue gentleman when your technical demands is unique. |
Bundle
Plastic bag + wooden carton
Certificate
FAQ
Q: Can you print other colours?
Yes. Custom-made shade can be printed on the equipment motor in accordance to your requirements.
Q: Is that factory price?
Indeed. We CZPT you all rates are based on manufacturing facility.
Q: What is the daily life span? what is the assure
The lifespan of equipment motor can reach 5-20 years based on various functioning situations .The promise time is 1 yr soon after shipping.
Q: What documents are available?
A entire assortment paperwork such as structural drawings, packing checklist, installation manual and relative certificates can be provided. In addition, customs declaration is provided. We supply 1-cease support for you.
Q: Is it in a position to custom-made?
yes, we could re-layout and make the equipment motor as your specifications if the amount is huge.
Equipment reducers, also named reducers, occur in several transmission styles and are made to multiply torque and reduce enter velocity to a wanted output pace. The major benefit of inline gearboxes is their ability to preserve control in applications involving high rotational speeds. Their performance and potential to offer higher input speeds with minimum backlash make inline reducer gearboxes perfect for a wide assortment of motion control apps
Under is a checklist of our presently available industrial gearboxes. If you can’t find what you are hunting for, remember to speak to the manufacturing unit for far more choices. At EP, we are continuously building new items and retrofitting old ones to satisfy consumer demands.
China Hot selling Hxg Series Hardened Hanging Shaft Mounted Material Nodular Blender Cast Iron Speed Reducer Helical Gear Gearbox with CE Certification (ATA100) with Hot selling
Item Description
Hxg Series Hardened Hanging Shaft Mounted Material Nodular Blender Forged Iron Speed Reducer Helical Gear Gearbox with CE Certification (ATA100)
one. The vast and complete range of N sequence for industrial purposes
two. Reduced-velocity shaft design and style: Cylindrical with key, splined, hollow with shrink disc or splined hollow shaft
three. Rigid and specific nodular cast iron casing
four. Reduced sound running, substantial manufacturing good quality standard
5. Higher and reliable overall performance, load potential and minimal-speed shaft bearing
You should simply click here for a lot more kinds!
Our Companies
With all our activities DNV-ISO 9001, SGS -accredited, we stand for best-high quality provider. Entrusting your gearboxes to the care of our Providers.
Help safeguard your gearbox from use and grinding, SGR gearbox converts torque reliably and efficiently.
We customize our CZPT planetary gear units, double enveloping worm gearbox, helical gear motor, modular design and style helical gear unit, worm gearbox, cycloidal gearbox and so forth to match your application and satisfy your needs.
These features allow a trustworthy and safe service life of in excess of 200 000 operational several hours.
Our consumers have been positioning their believe in in CZPT equipment units since 1997. A lot more than 500 000 equipment units of our gearbox are in use reliably about the world, in a lot of cases underneath very harsh circumstances.
Associated Items
For a lot more reducers and mechanical equipment, please simply click below to view
Gearboxes and reducers are enclosed mechanical reduction products typically utilised in today’s automated management systems to command torque from your motors and accomplish other motion-connected tasks. A gearbox permits you to improve torque although minimizing the speed of your prime mover output shaft. The output shaft of the gearbox rotates at a slower speed than the enter shaft. This generates a mechanical gain, rising torque. Conversely, your gearbox can be set in reverse, supplying increased shaft pace and lowered torque. Two widespread transmission configurations are straight and correct angle. On the web designs typically consist of helical or spur gears, planetary gears, cycloidal mechanisms, or harmonic generators. Right-angle patterns usually use worm or helical equipment drives, nevertheless, hybrid drives are also accessible. Gearmotors merge an enclosed equipment set with an electric powered motor to improve torque and efficiency whilst decreasing pace. Even though additional friction, inertia, or sharp load adjustments for quick-term operation of the actuator can cause troubles, they provide a prolonged running lifestyle by protecting against overloading. A variety of equipment ratios, speeds and torques are available to assist optimize overall performance and reduce prospective troubles. Browse to uncover the proper gearbox and reducer for your automation venture.
Right angle gearboxes (worm and planetary gears) are strong and can be utilised for 90° turns. An inline reducer (parallel shaft and planetary) is an perfect matching motor with high input speeds, or when gear motor efficiency is critical. Speak to our complex revenue workers to aid decide which transmission answer is very best for you.
China Best Sales F Series Parallel Key Shaft Helical Gear Motors Industrial Gearbox near me shop
Solution Description
F Series Parallel Essential Shaft Helical Gear Motors Industrial Gearbox
Features:
one. Compact framework and basic assembly
two. Extensive pace ranges and substantial torque
3. Minimal noise, good sealing overall performance, substantial efficiency
4. Steady and risk-free, long life time, universal
5. Multi-structure, different assembling techniques
Solution photograph:
Specification:
ANG Helical Gear Reducer | |
Product | R17 ~ 187, F37-177, K37-187, S37-ninety seven, HB01-26 |
Input electrical power | .06kw ~ 5000kw |
Enter pace | 750rpm ~ 3000rpm |
Reduction ratio | 1/1.3 ~ 1/27000 |
Input motor | AC (1 stage or 3 stage) / DC / BLDC motor |
Install variety | Foot / Strong shaft / Hollow shaft / Output flange… |
Efficiency | ninety four% ~ ninety eight % for R F K sequence |
Content of housing | die-forged aluminum / Cast iron / Stainless metal |
Precision of equipment | Correct grinding, class 6 |
Heat treatment method | Carburizing and quenching |
Add-ons | Brake / Flange / Motor adapter / Torque arm … |
FAQ
Q: Can you make the gearbox with customization?
A: Indeed, we can customize per your request, like energy, voltage, speed, shaft dimensions, flange, terminal box, IP quality, and so forth.
Q: Do you provide samples?
A: Yes. The sample is accessible for testing.
Q: What is your MOQ?
A: It is 1pcs for the commencing of our organization.
Q: What is actually your guide time?
A: Standard merchandise need to have 5-30days, a bit for a longer time for custom-made products.
Q: Do you supply complex assistance?
A: Yes. Our organization have design and growth crew, we can give technological assistance if you
need to have.
Q: How to ship to us?
A: It is offered by air, or by sea, or by teach.
Q: How to spend the money?
A: T/T and L/C are preferred, with a diverse currency, like USD, EUR, RMB, and many others.
Q: How can I know the product is appropriate for me?
A: >1ST validate drawing and specification >2nd take a look at sample >3rd start off mass production.
Q: Can I arrive to your firm to pay a visit to?
A: Of course, you are welcome to visit us at any time.
Q: How shall we speak to you?
A: You can ship an inquiry directly, and we will respond in 24 several hours.
When hunting at a reducer vs a gearbox, often the only big difference is terminology. This is since all reducers are gearboxes. Nonetheless, not all gearboxes are retarders. This could audio complex, but it is actually really basic. A reducer is a equipment set amongst the motor and the device. The function of the reducer is to lessen the rotational velocity transferred amongst these two endpoints. The reducer amplifies and multiplies the torque (enter) created by the motor. Next, a reducer, as the name suggests, lowers the pace of the input (output in rpm) so that the output is the appropriate speed. The time period “gearbox” is just a generic time period used for the equipment train amongst the motor and the device. Consequently, all reducers are gearboxes. Nonetheless, not all gearboxes minimize input pace. Even though uncommon, gearboxes can really increase enter speeds. By considerably the most widespread sort of gearbox is a retarder, but it would be incorrect to say that all gearboxes are retarders.
Gearboxes are mechanical gadgets that assist generate programs maintain optimum velocity and torque for purposes. Also recognized as gearboxes and equipment drives, they decrease the rotational velocity of the input shaft by a specified share and increase the energy delivered to the output shaft by the exact same proportion. Ratio multipliers improve the deceleration and torque provided by the reducer by a specified ratio and are suitable for parallel installations. Mounting bases, torque arms and flange couplings are add-ons utilized with the reducer. They are generally utilised in programs where the reducer is not immediately linked to the push mechanism.
in Nairobi Kenya sales price shop near me near me shop factory supplier F Parallel Shaft Helical Gear Boxes with 0.75kw Motor for Conveyor manufacturer best Cost Custom Cheap wholesaler
There is a technical center of province amount, EPG academician functioning station, experiment station for EPG post medical professionals, and countrywide 863 system set up in EPG group. With these platforms and sturdy specialized capability, the far more than four hundred experts have developed all variety of particular higher exact and higher strength merchandise, conducted mould plans for key parts in the vehicle and countrywide sector revitalizing system, ensuing a lot more than 5000 produced above, among which 33 things are autonomous patent technology with 4 patent accepted . Furthermore, WE CAN Make Custom-made VARIATORS, GEARED MOTORS, Electrical MOTORS AND OTHER HYDRAULIC Goods According TO CUSTOMERS’ DRAWINGS. Our specialists and engineers have 23 several years of Encounter in the Bearing Business.
EPT F helical PXiHu (West EPT) Dis.Hu (West EPT) Dis.lel EPEPT
EPT F helical pXiHu (West EPT) Dis.Hu (West EPT) Dis.lel speed reduction EPT box are based on the building block design and style,so it’s handy for them to in shape all types of motors or join with other EPTT input.The exact same variety of merge can in shape motors with different EPTT,so that it’s feasible for diverse varieties of EPTTs to mix or hook up.
EPT F series speed EPT EPTT is a single kind of pXiHu (West EPT) Dis.Hu (West EPT) Dis.lel shaft helical EPT EPTT , which consist of two or 3 phases helical
EPTs (relate to EPT ratio) in the very same situation . The hard tooth area EPT use the high quality alloy steel ,the
process of carburizing and quenching, grinding one,Output torque:200-18000(N.m)
one,Rated EPTT:.twelve-two hundred(kw)
2,Input pace: le3000 (rpm)
3,Output speed: le393(rpm)
four,EPTT ratio: ge3.77
5,Series:2-3
6,Mounting way:M1-M6
EPT F helical EPEPT components :
housing content: | EPTT2OO higher-power forged iron for F37,47,fifty seven,sixty seven,77,87 EPTT250 EPT strength cast iron for F97,107,127,157 |
EPT material: | 20CrMnTi |
EPT hardness | HBS90-240 |
Surface area hardnesss of EPT | EPTC58 deg-62 deg |
EPT core hardness | EPTC33 deg-forty deg |
Input/Output shaft material | 40Cr |
Input/Output shaft hardness | HBS241 deg-286 deg |
Shaft at oil seal postion hardness | EPTC48 deg -55 deg |
Machining precision of EPTs material | Precise grinding six-five grade |
Efficiency | up to 98% |
Noise(Max) | 60-68dB |
Tem.rise: | forty degC |
Vibration | le20um |
EPT | IP54, F course ,B5 FLANGE |
colour : | blue (if you want massive amount ,we can accomplished as your desired color ) |
Our reduction EPTed motor Advantage
one,reasonable price tag with exceptional good quality
two,supply in time
three,secure ,reputable ,economical and durable
4,steady EPTT ,quiet procedure
5,sleek running and minimal sounds
6,nice visual appeal ,sturdy services lifestyle
seven,substantial heat-radiating efficiency ,high carrying potential
eight,each and every EPTT have to be analyzed prior to EPTT
nine.reply in substantial efficiency for the duration of 1 working day
ten. skilled to produce EPTT and electrical motor .
If there is any issue, you should do not hesitate to make contact with with me (EVA), U can send out us your inquiry. And you will get reaction in one functioning day.
EPT CATALOGUE :
Creating Procedure:
WORKSHOP EPT:
CERTIFICATION :
EPTAGE :
for one particular container, straight loading ,for less, all items with pallet,
FAQ
one, Q:what is your MOQ for ac EPEPT ?
A: 1pc is ok for every kind electrical EPT box motor
2, Q: What about your guarantee for your induction pace EPEPT ?
A: one year ,but other than gentleman-created ruined
3, Q: which payment way you can accept ?
A: TT, western union .
four, Q: how about your payment way ?
A: 100%payment in EPTd less $5000 ,30% payment in EPTd payment , 70% payment prior to sending over $5000.
five, Q: how about your EPTT of speed reduction motor ?
A: plywood circumstance ,if dimensions is tiny ,we will pack with pallet for considerably less one container
6, Q: What details must be presented, if I buy electrical helical EPTed motor from you ?
A: rated EPTT, ratio or output velocity,type ,voltage , mounting way , quantity , if much more is EPT ,
in Da Nang Viet Nam sales price shop near me near me shop factory supplier Customized Helical Gear Shaft Used for Mining Machinery manufacturer best Cost Custom Cheap wholesaler
Great consideration has been compensated on environmental safety and energy conserving. If you are fascinated in any of our products or would like to go over a possible purchase, make sure you feel totally free to speak to us. guarantees the stability and consistency of the important perform of elements. EPTT EPTcal EPT Shaft Utilized For EPT EPTTry
EPT | 20CrMnTi |
Enamel Type | Spur EPT |
Heat Remedy | Carburizing |
Area Hardness | 58-62EPTC |
EPT Teeth Milling | radic |
EPT Tooth Grinding | radic |
Enamel Milling
Enamel Grinding
Customized manufactured areas, we are producing components accordig to personalized drawings or samples.
The engineering software we are utilizing: AutoCAD, Solidworks
Engineers severices also accessible
Best China manufacturer & factory SMR in Oklahoma City United States Shaft Mounted helical speed reducer worm gearbox 40 bevel gear box shaft drive unit txt shaft mounted gear speed reducer With high quality best price
Our solution range also covers locking assemblies (clamping elements/locking unit), taper bushes, QD bushes, bolt-on hubs, pto shaft, agricultural gearboxes,torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, universal joint, rod finishes and yokes.
Overview
Quick Specifics
- Applicable Industries:
-
Developing Material Stores, Manufacturing Plant, Equipment Restore Stores, txt shaft mounted gear pace reducer
Our merchandise are selling nicely in Chinese markets and some goods sold in international markets are effectively gained by Chinese and overseas consumers at property and overseas.
- Gearing Arrangement:
-
Helical
- Output Torque:
-
max 8000NM
- Enter Pace:
-
1440
- Output Pace:
-
seventy two, a hundred and ten, 288
- Spot of Origin:Zhejiang, China
- Manufacturer Name:
-
OEM
- Product Amount:
-
SMR
- Rated Electrical power:
-
two.68~134.2
- color of Shaft Mounted pace reducer:
-
environmentally friendly blue gray
Supply Potential
- Supply Potential:
- 5000 Piece/Parts per Thirty day period
Packaging & Shipping and delivery
- Packaging Specifics
- common export packing and wood pallets packing
- Port
- Shanghai or Ningbo
-
Lead Time
: -
Amount(Parts) EPG aims at actively playing a major part in a marketplace which retains creating new competition approaches with regard to high quality, financial system and existence. This aim is to be reached by indicates of the joint assist coming from all the company’s departments (Creation dept., Technical dept. and Product sales dept.) and a hugely expert around the world distribution community.
one – 5000 In our sales plan we supply standard and extensive-angle PTO generate shafts. Regarding the customers’ wants there are various measurements, lengths and protection aspects (clutches) available.
>5000 Est. Time(times) thirty To be negotiated
Online Customization
Solution Description
Solution Description
SMR Metric Sequence
Sizae: B-J
Ratio: 5:1, 13:1, twenty:1
Greatest Output Torque: 8000 Nm
SMR Shafted mounted equipment velocity reducer:
1) Shafted mounted gear unit for conveyer systems
2) All gears are warmth handled and fixed to achieve minimal noise and high output
3) Mounting proportions are interchangeable with Fene
Item Paramenters
Product Paramenters
Relevant Merchandise
Associated Products
Product packaging
Product packaging
FAQ
FAQ
Q: Are you buying and selling business or company ?
A: HZPT group is made up in 3 factories and 2 abroad sales cooperations.we are making vacuum pumps,air compressors and gearboxes.
Q: How lengthy is your shipping and delivery time ? What is your phrases of payment ?
A: Typically it is thirty-forty five times. The time may range depending on the item and the amount of customization. For regular goods,
the payment is: thirty% T/T in advance ,harmony before shippment.,for tailored merchandise,fifty% downpayment is requested generally.
Q: What is the precise MOQ or price for your solution ?
A: As an OEM business, we can offer and adapt our items to a vast range of wants.Thus, MOQ and price may possibly tremendously range with depth dimension, substance and further specificationswhen you place orders,satisfaction get in touch with us in progress to communicate all specifics